Log:
Évaluations - 3, GPA: 4 ( )

Instructions Philips, Modèle AZ3068

Fabricant : Philips
Taille : 910.5 kb
Nom Fichier : az3068_37_dfu_eng.pdf
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


5 Repeat steps 1-4 to store other stations. Helpful hints: You can erase a preset station by storing another frequency in its place. DIGITAL TUNER Autostore Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased. • Press and hold PROGRAM until appears. ™ Available stations are programmed. ™After all stations are stored, the first autostore preset station will then automatically play. To listen to a preset or autostore station Press the PRESET (ALB/ PRE) -, + buttons once or more until the desired preset station is displayed. MP3-CD/CD PLAYER About MP3 The music compression technology MP3 (MPEG1 Audio Layer 3) significantly reduce the digital data of an audio CD while maintaining CD quality sound. • Getting MP3 files: you can either download legal music files from the internet to your computer hard disc, or create such files by converting audio CD files in your computer through appropriate encoder software. (128kbps bit rate or higher is recommended for MP3 files.) • Creating a MP3 CD: burn the music files from your computer hard disc on a CDR or CDRW using your CD burner. Helpful Hints: – Make sure that the file names of the MP3/WMA files end with .mp3 or wma. – Total number of music files and albums: around 350 (with a typical file name length of 20 characters). – The length of file names affects the number of tracks for playback. With shorter file names, more files can be burned on a disc. Playing a disc This player plays Audio Discs including CD-R/CD-RWs, and MP3 CDs. • CD-I, CDV, VCD, DVD or computer CDs are not possible. • DRM-protected WMA disc is not supported. 1. Press STANDBY ON yonce or more to on, then select CD source (or press CD on the remote control). 2. Press OPEN•CLOSE to open the disc door. ™Display show when the disc door is open. 3. Insert a disc with the printed side facing up and press down on OPEN•CLOSE to close the CD door. ™ ,is displayed as the player scans the contents of a disc. – MP3-CDs may take more than 10 seconds to read. = Audio CD: the total number of tracks and the total playing time are displayed. MP3-CD: the total numbers of tracks and albums are displayed respectively. 4. Press 2; to start playback. =MP3-CD /WMA only:: the album/track information appears (if the ID3 tag information is available). MP3-CD/CD PLAYER Helpful Hints: -When playing a disc with CD Audio tracks and MP3/WMA files, the CD Audio tracks will be played first. - “0” is shown as your album number, if you have not organized your MP3/WMA files into any albums on your disc. 5. To pause playback press 2;. Press 2; again to resume play. = Time digits flashes during pause. (See 4) 6.To stop playback, press 9. Helpful Hints: CD play will also stop when: – the disc door is opened – the disc has reached the end – you select other sound sources. Display information (MP3/WMA-CD only) The ID3 tag is part of an MP3/WMA file and contains various track information such as the track.s title or the artist.s name. • During playback, press FM•MW•DISPLAY on the set repeatedly to view ID3 tag information or select your display function. – Display shows: if ID3 tag information is not available. Helpful Hints: -Complete the ID3 tag information with your MP3/WMA encoder software before burning the MP3/WMA-CD. Selecting a different track •Press SEARCH . or § ( . or § on the remote control ) once or repeatedly until the desired track number appears in the display. MP3-CD/WMA only: First press ALBUM/ PRESET – or + once or more to find your album. • In the pause/stop position, press 2; to start playback. Helpful Hints: – In shuffle modes, press . to go to the beginning of the current track. MP3-CD/CD PLAYER Finding a passage within a track 1. During playback, press and hold SEARCH . or § (5, or 6 on the remote control ) = The disc is played at high speed and low volume. 2. When you recognize the passage you want, release . or §. =Normal playback continues. Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory. 1. In the stop position, press . or § once or repeatedly to select your desired track number. MP3-CD/WMA only: • First press ALBUM/ PRESET – or + once or more to find your album. 2. Press PROGRAM. ™ and the number of tracks stored appear briefly. (See 5) ™ Display shows: PROG and the selected track number. (See 6) 3. Repeat steps 1-2 to select and store all desired tracks. 4. To start playback of your disc program, press 2;. Helpful Hints: – During normal playback, you can press PROGRAM to add a current track to your program list. – appears if you press PROGRAM and there is no track selected. – appears if you try to store more than 20 tracks. Reviewing the program • In the stop position, press and hold down PROGRAM for a while until the display shows all your stored track numbers in sequence. Helpful Hints: – Display shows : if there is no track progra...

Ce manuel est également adapté pour les modèles :
CD-joueurs - AZ3068/37B (910.51 kb)
CD-joueurs - AZ3068/37 (910.5 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories