Évaluations - 3, GPA: 4 ( )

Fabricant : Dish Network Taille : 8.7 mb Nom Fichier : Chapter2.pdf Langue d'enseignement:

Satellite Receiver The ViP622 DVR and ViP722 DVR are dual-tuner satellite receivers with digital video recorders. With either receiver you can view/record standard-definition (SD) and high-definition (HD) DISH Network programming on two TVs or view/record over-the-air digital/HD broadcasts on the nearby HDTV. • Nearby TV (TV1)—Connect to an HDTV to view SD and HD DISH Network programming and over-the-air digital/HD broadcasts. Programming from the receiver is delivered to the nearby TV using short audio/video cables. • Remote TV(s) (TV2)—Connect to an SDTV to view SD and down-converted HD broadcasts. Programming from the receiver is usually delivered to the remote TV(s) using existing in-home coaxial cable. Remote Controls Two remote controls come with your receiver: • Remote Control 1 - An Infrared (IR) remote to control programming for the nearby TV (TV1). This remote control is labeled with a green number 1, which matches similar markings on the receiver output connections and the menus for the nearby TV. • Remote Control 2 - An Ultra-High Frequency Pro (UHF Pro) remote to control programming at a remote TV (TV2). This remote control is labeled with a blue number 2, which matches similar markings on the receiver output connections and the menus for the remote TV. Be sure to set up the remote control to operate the receiver (see page 72). Dual and Single Modes Your satellite receiver includes two modes of operation: Dual and Single. These modes increase your entertainment options because you’ll be able to choose how you watch and record your favorite programs. Dual Mode While in Dual Mode, you can use this dual-tuner satellite receiver to watch different programming in two separate locations: • Nearby TV—Programming from the receiver is delivered to the TV near the receiver using short audio/video cables and is controlled using Remote Control 1. The nearby TV is also referred to as “TV1.” • Remote TV—Programming from the receiver is delivered to a TV located in another room using existing in-home coaxial cable and is controlled using Remote Control 2. The video displayed on the remote TV is always in standard definition (SD). High-definition stellite 12 Satellite Receiver Dual and Single Modes programming can be viewed on the remote TV; however, it is down-converted for viewing on the remote TV. The remote TV is also referred to as “TV2.” You can tell your receiver is in Dual Mode because the front panel mode indicator will light and the menu and other screens will display Dual Mode (as shown below). TUE 3/19 6:25 pm TUE 3/19 6:25 pm Single Mode 13 Chapter 2Chapter 2 Dual and Single Modes Single Mode provides dual-tuner receiver features—like Picture-in-Picture (PIP) and the ability to watch one live program while recording another—to all connected TVs. Single Mode delivers the same programming to all of the TVs connected to the satellite receiver and allows control by either remote control. The format of the programming shown on the remote TV(s) is standard-definition (SD); high-definition (HD) is shown only on the nearby TV. High-definition programming can be viewed at either TV location; however, it is down-converted for viewing on the remote TV. You can tell you are in Single Mode because the front panel mode indicator will light and the menus and other screens will display Single Mode (as shown below). TUE 3/19 6:25 pm 14 Satellite Receiver Remote Control Switching Between Dual and Single Mode Put the satellite receiver in Single or Dual Mode by pressing the front panel MODE button. Keep the following items in mind when switching the satellite receiver between Dual and Single Mode: Dual Mode Single Mode Indications Dual Mode front panel indicator lights. Single Mode front panel indicator lights. Recording The Recording front panel indicator lights to show whether TV1, TV2, or both are currently recording. The TV1 Recording front panel indicator lights whenyou are recording from one or both tuners. Favorites Lists Favorites Lists set up for both outputs (TV1 and TV2) are available. Only Favorites Lists set up for TV1 are available. The lists for TV2 are not lost, they are simply unavailablein Single Mode. Locks Locks set up for both outputs(TV1 and TV2) are available. Locks set up for only TV1 are available. The locks for TV2 are not lost, they are simply unavailable in Single Mode. Closed Captioning Closed Captioning (CC) from SD and HD programming is available onTV1. CC from only SD programming is available onTV2 (CC must be enabledon the TV). Closed Captioning from the receiver is available on both outputs (TV1 andTV2). Note: If someone is viewing the remote TVs while the receiver is in Dual Mode, you will see a popup on the nearby TV warning you that you are about to disrupt the use of the TV2 outputs. Remote Control The two remote controls give you access to all the features of your satellite receiver. You can set up each remote to control the satellite receiver and up to three other devices (see...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :