Évaluations - 2, GPA: 4.5
(
)
)
|
Facilité d'utilisation
It makes no difference if selection of product is by Control Panel or by Product Select Buttons or both, therefore, always follow this diagram for proper setup. Concerning signal path, the Model 980EZ will be located just before the amplifier inputs (see Appendix A). In the 2-channel configuration, the Front Inputs and Front Outputs are the only connections that are used. In the 6-channel configuration, all three sets of inputs/outputs are used. The Low-Level buses (e.g., front, rear, sub) continue separately from the 980 on to their corresponding amplifiers or amp groups. 2-Channel Setup for 980EZ System Power, (connect 805-016 here) Front Low-Level Out From Source or Processor System Bus 902 or 903 Connections Control Panel Connection SYSTEM BUS © Audio^^Authority* y4ccessEzm Model 980 System Module LOW VOLTAGE THEFT ALERT™ THEFT ALERT™ RESET POWER MODE SPEAKER LIMIT I" 1 SYSTEM RESET © © © © Optional Theft Alert Setup Output to 12V Siren or Output to store security system See page 30 for instructions on attaching remote devices Set Parallel Speaker Limit (see page 25) System Reset Button POWER 6-Channel Setup for 980EZ Sub Low-Level Out From Processor Rear Low-Level Out From Source or Processor Front Low-Level Out From Source or Processor Audio^^Authority* Tech Support USA and Canada: 800-322-8346 (Mon-Fri 8:30 AM to 5:00 PM Eastern Time) Phone: 859-233-4599 Fax: 859-233-4510 Hookup drawings and FAQ 47...