Log:
Évaluations - 2, GPA: 3 ( )

Instructions Ashly, Modèle ne4250.25

Fabricant : Ashly
Taille : 319.09 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sinewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier’s control surface and DSP section. Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators. Four-channel Mic-pre, AES/EBU, and Cobranet modules will be available as options. Eight-channel NE series amplifiers are also available Watts per channel Model 8 ohms 4 ohms 25V/70V/100V ne4250 150 250 NR ne4250.25 NR NR 250 ne4250.75 NR NR 250 ne4250.10 NR NR 250 Input Options Four-channel Mic pre AES/EBU CobraNet Accessories WR-1 2-ch Level Control WR-2 Four Position Switch WR-5 Programmable Selector RD/RW8 8-ch Level Control SRA Series specifications NE Series specifications ne4250 ne4250.25 ne4250.70 ne4250.10 ne4250pe ne4250.25pe ne4250.70pe ne4250.10pe Rated Power 8 ohms (per channel) 150W NR NR NR Rated Power 4 ohms (per channel) 250W NR NR NR Rated Power 8 ohms (Bridged) 500W NR NR NR Rated Power 25V, 70V, 100V (per channel) NR 250W 250W 250W S/N (20 Hz-20 kHz, unweighted) >98dB >98dB >98dB >98dB 1/8th Output (Pink Noise) 31.25W 31.25W 31.25W 31.25W 1/8th Draw (Pink Noise) 200W 200W 200W 200W 1/8th Current (Pink Noise) 2.7A 2.7A 2.7A 2.7A Idle Power (Pink Noise) 30W 30W 30W 30W Idle Current (Pink Noise) 0.4A 0.4A 0.4A 0.4A Weight: Net Shipping 21.0 lbs. (9.53kg) 26.0 lbs. (11.79kg) 21.0 lbs. (9.53kg). 26.0 lbs. (11.79kg) 21.0 lbs. (9.53kg). 26.0 lbs. (11.79kg) 21.0 lbs. (9.53kg). 26.0 lbs. (11.79kg) Frequency Response (8 ohms) 20 Hz - 20k Hz, (unweighted) ±1dB Input Impedance 20k ohms, balanced Input Sensitivity 6.2dBu Maximum Input Level +21dBu Internal HPF ( 25V, 70V, 100V models) (contolled by software) 80Hz (12dB/oct), 400Hz (6dB/oct), and OFF Damping Factor (8 ohms) > 250 Cooling Temperature dependent speed-controlled fan (Front in, Side out) Output Circuitry Class D Connectors (each channel) Input - Euroblock Output - Euroblock Front Controls AC Power Switch, Individual input attenuators Front indicators (LED color) Power (Blue), Standby (Yellow), Protect (Red), Disable (Yellow), Com (Green), Bridge (Green), Signal Level -18dB, -12dB (Green), -6dB (Yellow), Clip (Red), Temp (Yellow) Rear Controls Ethernet 10/100, Channel bridge switch (Low-Z only), Remote standby, Preset recall (4), Remote Level (4), ...

Ce manuel est également adapté pour les modèles :
Récepteur et amplificateur - ne4250 (319.09 kb)
Récepteur et amplificateur - ne4250.10pe (319.09 kb)
Récepteur et amplificateur - ne4250.25pe (319.09 kb)
Récepteur et amplificateur - ne4250.70 (319.09 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories