Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Select and press either the MATTE Button (47) or the WHITE Button (48) as a Key-Fill signal. The Key-Fill signal will be filled on the key signal. When the MATTE Button (47) is pressed, the choice of desired color is available from the MATTE GENERATOR. Press the EXT. CAMERA Button (46) as a Key Signal, (or A-Button (45) or B-Button (51) can be selected) Press the ON Button (44). The Fill color will then be displayed. Adjust the Low Level Key Control (53) to obtain the clear edge key image. Similarly adjust the High Level Key Control (52) as necessary. Example of using the title card option. In case the title is written with white letters on the black card, adjust the Low Level Key Control (53) to obtain a clear edge key image. In case the title is written with black letters on the white card, adjust the High Level Key Control (54) to obtain a clear edge key image. Panasonic Notes 1. 2. When the optional Character Generator WJ-KB50 is used for the key source, set both the KEY LEVEL controls (52) (53) to the low end position. If the EXT. CAMERA signal is jittery, as in the case of a VTR playback signal, this could cause a disturbance in synchronization. When the REVERSE Button (50) is pressed, the keyed -image and the background image will reverse the settings. Normal Reversed When the EDGE Button (49) is pressed, two types (shadow, border) and five kinds of edges are available by pressing this button repeatedly. Normal Narrow Border Wide Border Narrow Shadow Wide Shadow Drop Shadow Notes : 1. When the Key image is white, the color on the edge of the threshold can be set to any one of 9 colors, solid or graded by pressing the Matte Color Selector (13) and the Gradation Button (12) to the desired color. 2. When the Matte Colored key image is used, the edge color if displayed at ail is always black. F. Basic Operation-5 Fade Synchronized fading makes it possible to operate the Video, Downstream Key and Audio fades together, or in any combination. Each of the three can be controlled independently, via either Auto Fade or a manual Fader. The following area shows the Fade Control Block. Note The VIDEO (80), DSK (82) and/or AUDIO (84) signals can fade out to one of the following : MATTE (81), WHITE (83), BLACK (85), A (93), or 8 (94) signal. F-1. Video Fade-Out (In) • Set the Fade Control (95) to the IN (OUT) position. • Select the fade out scene from: MATTE, WHITE, BLACK A or B. • Press the VIDEO Button (80). • Slide the Fade Control (95) to the OUT (IN) position. The IN (OUT) LED starts blinking (as the fade progresses) then the OUT (IN) LED begins blinking after the fade is halfway done. The OUT (!N) LED becomes continuously on when the Fade Control (95) reaches the AUT (IN) position. If the automatic fading is to be operated, first adjust the TF3ANSITION Control (91) to the desired auto fading time. Then press the AUTO FADE Button (92) when ready to execute. The Auto-Fade can be stopped during Auto-fading by pressing this button. The LED on the VIDEO Button (80) blinks white stopping. The Auto-fading wit! start again by pressing the AUTO FADE Button (92) again. F-2. Downstream Key Fade-Out (In) • Set the Fade Control (95) to the IN (OUT) position • Press the DSK Button (82). • Slide the Fade Control (95) to.the OUT (IN) position. The IN (OUT) LED starts blinking (as the fade progresses) then the OUT (IN) LED begins blinking after the fade is halfway done. The OUT (IN) LED becomes continuously on when the Fade Control (95) reaches the OUT (IN) position. Note If the automatic fading is to be operated, first adjust the TFIANSITION Control (91) to the desired auto fading time. Then press the AUTO FADE Button (92)when ready to execute. The Auto-Fade can be stopped during Auto-fading by pressing this button. The LEO on the DSK Button (82) blinks while stopping. The Auto-fading will start again by pressing the AUTO FADE Button (92) again. F-3, Audio Fade-Out (In) • Set the Fade Control (95) to the IN (OUT) position. • Select the fade out scene from : MATTE, WHITE, BLACK, A, or B. • Press the AUDIO Button (84). • Slide the Fade Control (95) to the OUT (IN) position. The IN (OUT) LED starts slinking (as the fade progresses) then the OUT (IN) LED begins blinking after the fade is halfway done. The OUT (IN) LED becomes continuously on when the Fade Control (95) reaches the OUT (IN) position. - 33 - Notes : 1. If the automatic fading is to be operated, first adjust the TRANSITION Control (91) to the desired auto fading time. Then press the AUTO FADE Button (92) when ready to execute. The Auto-Fade can be stopped during Auto-fading by pressing this button. The LED on the AUDIO Button (84) blinks while stopping. The Auto-fading will start again by pressing the AUTO FADE Button (92) again. 2. The headphone audio does not fade. 3. When either MATTE, WHITE or BLACK is selected for the fade out scene, no sound comes out. However when-either A or B is selected for the fade out scene...