Évaluations - , GPA: ( )

Instructions Philips, Modèle DTR 5520

Fabricant : Philips
Taille : 3.85 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

• Default subtitles mode - Use this to set how you prefer to display subtitles. You can set this to Activated, Not activated, Auto when no correct audio (default), Auto when audio is muted or For hearing-impaired. • Subtitles language - Use this to set your preferred language for subtitles to English (default), Gaelic, Welsh or Irish. Recording • Record Link - Use this setting to enable or disable the control, by your HD receiver, of the start-stop recording function of your Video or DVD-R recorder (see the note on page 29). Analog output • Video on AUX Scart - Use this to set the type of analogue video signals that are output on the AUX SCART connector of your HD receiver. You can set this to RGB (default when V-Out is set to AV) or CVBS (default when V-Out is set to HDMI). • Audio on AUX Scart - This setting applies when your HD receiver is connected via a SCART Cable to a standard-definition TV. Use this to set the type of analogue audio signals that are output on the AUX SCART connector of your HD receiver. You can set this to Mono or Stereo (default). • TV format - Use this to set the format of the analogue video that is output on the AUX SCART connector of your HD receiver. You can set this to 4/3 Letter Box, 4/3 Centre Cut Out or 16/9 (default). The options determine how widescreen (16:9) programmes show on a standard- definition TV with aspect ratio of 4:3. Digital output • HDMI output resolution - Use this to set the HDMI video resolution to 576i, 576p, 720p, 1080i, 1080p, Auto (default) or Original. Note that you can also change this setting using the RES button on the front panel of your HD receiver. • Audio capabilities on HDMI - Use this to set the HDMI audio format to PCM (default) or Auto*. • Audio capabilities on S/PDIF - Use this to set the S/PDIF audio format to PCM (default) or Dolby Digital*. You can also set this to Not connected. • Easy Link mode - For future use. • TV format - Use this to set the format of the high-definition video that is output on the HDMI connector of your HD receiver. You can set this to 16/9 Pillar Box (default), 16/9 Full Screen or 16/9 Zoom. These options determine how standard (4:3) programmes show on a TV with aspect ratio of 16:9. Note that you can directly change this setting using the picture format button on your remote control. * The Auto and Dolby Digital settings on HDMI or S/PDIF are not recommended until your HD receiver has been updated with the appropriate software. Visit regularly to check if the relevant software update is available. Automatic eco mode Use this to set the time after which your inactive HD receiver automatically enters into the active standby mode. You can set this to off, 3 hours (default), 4 hours, 5 hours, 6 hours, 7 hours or 8 hours. Return channel Use this to configure your HD receiver to connect to the internet, which then serves as a return channel to your Digital TV service provider. The return channel is necessary to use any interactive applications that your Digital TV service provider may offer. Before configuring the return channel, be sure to connect your HD receiver to your network router using an Ethernet cable. Then choose either DHCP to set up your connection automatically or manually enter all the parameters like IP address, Network mask, Gateway and DNS settings to match your router’s settings. Default volume Use this to set the default volume at wake- up of your HD receiver. Changing parental control settings From the Settings menu, use / to highlight Parental control and press or OK. The Parental control menu appears. To change the parental control severity settings, use / to highlight Parental control limits, and press or OK. Use / to highlight the severity level you want to set, and press or OK to save your changes and return to the previous menu. Note that if you set the Parental control limits to Off, the child timers and channel lock settings (see below) will not have any effect. Note When Parental control limits is set to ON, menu items like Parental control and Set-up will be protected by the PIN code. To create a new child timer, use / to highlight Child timers, and press or OK. Make sure that Define child timer is highlighted and press or OK. Use / / / to set the time period during which you will be able to watch any unlocked channel without having to enter your PIN code. Press the green button to confirm. To delete the child timer, make sure Modify child timer is highlighted and press the red button. To modify the child timer, make sure Modify child timer is highlighted and press or OK. Make the required changes and press the green button to confirm. To lock a channel, use / to highlight Channel lock, and press or OK. Use / to highlight the channel you want to lock, and press OK. Press or BACK to return to the previous menu. To change your PIN code, use / to highlight Change PIN code, and press or OK. Use the number buttons to first enter your current PIN code and then enter y...