Évaluations - 2, GPA: 4.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Récepteur et amplificateur - STR-DA3200ES (12.18 mb)
Facilité d'utilisation
Not for announcements that are located by TP/TA Leisure & Programs on recreational Hobby activities such as gardening, fishing, cooking, etc. Jazz Music Jazz programs Country Music Country music programs National Music Programs featuring the popular music of the country or region Oldies Music Programs featuring oldies music Folk Music Folk music programs Documentary Investigative features None Any programs not defined above Tuner Operations 87GB Other Operations Other Operations Displaying menus of the receiver on the TV screen Press ON SCREEN, then display a menu on the TV screen connected to this receiver. You can set up menus easily. 1 3 2,7 5,6 4 1 Turn on the receiver and the TV. 2 Press ON SCREEN. Switch the input of the TV so that a setting menu is displayed on the TV screen connected to this receiver. 3 Press RECEIVER. Receiver operation is enabled. 4 Press MENU. The following menus are displayed on the TV screen. 1-Level Settings 2-Equalizer Settings 3-Surround Settings 4-Tuner Settings 5-Audio Settings 6-Video Settings 7-Speaker Settings 8-System Settings 9-Auto Calibration 5 Press V/v repeatedly to select the menu item, then press to enter the menu. 6 Press V/v repeatedly to select the parameter, then press to enter the parameter. Depending on the parameter, the selected parameter can be entered by completing step 7. 7 Press ON SCREEN. The menu setting display disappears. 88GB 4 Press V/v repeatedly to select Naming inputs You can enter a name of up to 8 characters for inputs and display it on the receiver’s display. This is convenient for labeling the jacks with the names of the connected components. 1 2 4-7 3 1 Press the input button to select an input you want to create an index name for. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. To select a component connected to the HDMI IN1/2 jack, press the HDMI button repeatedly. 2 Press RECEIVER. Receiver operation is enabled. 3 Press MENU. The list of setting menus appears. “Tuner Settings,” “Audio Settings,” “Video Settings,” or “Auto Calibration.” 5 Press to enter the menu. 6 Press V/v repeatedly to select “NAME IN ?” or “A.CAL NAME?,” then press to enter. The cursor flashes and you can select a character. Press V/v to select a character, press B/b to select the position in which to enter the selected character. To enter a blank space Press B/b without inputting a character. You can also turn +/– on the receiver until a blank space appears on the display. If you made a mistake Press B/b until the character you want to change flashes, then turn +/– on the receiver to select the correct character. Tip You can select the character type by pressing V/v. Alphabet (upper case) t Alphabet (lower case) t Numbers t Symbols 7 Press to enter the name. The entered name is registered. Other Operations 89GB 1 Press the input button. Switching between digital and analog audio (INPUT MODE) When you connect components to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch. 1 2 3 You can also use INPUT SELECTOR on the receiver. 2 Press RECEIVER. Receiver operation is enabled. 3 Press INPUT MODE repeatedly to select the audio input mode. The selected audio input mode appears on the display. Audio input modes •AUTO Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected. •COAX Specifies the digital audio signals input to the DIGITAL COAXIAL jack. •OPT Specifies the digital audio signals input to the DIGITAL OPTICAL jack. •ANALOG Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Notes • You cannot select the digital audio input assigned to another function using the DIGITAL ASSIGN function (page 91). • Some audio input modes may not be set up depending on the input. • When either HDMI input is selected, “------” appears on the display, and you cannot select other modes. Select an input mode other than the HDMI input, then set the audio input mode. • When the ANALOG DIRECT function is being used, or MULTI IN is selected, audio input is set to “ANALOG.” You cannot select other modes. 90GB 4 Press V/v repeatedly to select Listening to digital sound from other inputs (DIGITAL ASSIGN) You can reassign digital audio input that has OPTICAL or COAXIAL (VIDEO 1 IN, DVD IN, TV/SAT IN, MD/DAT IN, SA-CD/CD IN) signals to another input (VIDEO 2 etc.) when they are not currently being used. For example, to make the DVD player the sound source for the digital audio input using the OPTICAL IN jack on the receiver, then: • Connect the optical output jack of the DVD player and the OPTICAL VIDEO 2 IN jack of the receiver. • Assign “VIDEO 2 OPT” to “DVD” in the DIGITAL ASSIGN setting. 1 3-8 2 1 Press RECEIVER. Receiver operation is enabled. 2 Press MENU. The list of settin...