Évaluations - 3, GPA: 4.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
MUTe Mutes the sound from the unit. Press again to restore the sound to the previous volume level. TV ChAnnel Switches between the available TV channels. AUTO POWeR linK Synchronizes to turn the unit on with the optical signal from the TV. SOUnD MODe Selects the sound field mode. (NEWS, DRAMA, SPORTS, GAME, CINEMA, MUSIC and PASS(Original Sound)) AV SynC Used to help sync video to audio when connected to a digital TV. S/W leVel Adjusts the Subwoofer level. . The remote control can operate TVs made by SAMSUNG only. . Depending on the TV you are using, you may not be able to operate your TV with this remote control. In this case, operate the TV using the TV's remote control. installing batteries in the Remote Control 1.Lift the cover at the back of the remote control upward as shown. 2.Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3.Replace the cover. Assuming typical TV usage, the batteries last for about one year. Operation Range of the Remote Control The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor. 10 11 EnG . connections INSTAllING THE WAll MOUNT You can use the wall mount bracket to mount this unit on a wall. Do not hang onto the installed unit and avoid any impact to the unit. Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product. When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. For the optimal performance in a wall mount installation, keep the speaker system at least 2 inches (5 cm) distant from the TV. .. . . 2. Then, fit the unit into the corresponding slots of the wall mount bracket. For secure installation, make sure the mounting studs slide firmly down into the bottom of the slots. 1. Place the wall mount bracket on a wall surface and then secure it with two screws (not supplied). 3. This is the completion of the suggested wall mount installation. connections Installation Precautions Do not install on a place other than vertical wall. For the installation, avoid high temperature or humidity, or wall that cannot sustain the weight of the set. Check the strength of the wall. If the strength of the wall is insufficient for the product installation, make sure to reinforce the wall before the installation. Check the material of the wall. If the wall is made of plaster board, marble, or iron board, purchase and use the appropriate fixing screws. Cables connecting to external devices are to be connected to the set before installing. Be sure to turn off and unplug the unit before installation. Otherwise, it may cause electric shock. • • • • • • 1 2 2 inches (5 cm) or more cOnnEcTinG THE WiRElESS SUBWOOFER The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly) automatically when main unit is turned on. If the link indicator does not light when main unit and subwoofer are turned on, please set the ID by following the process below. 1. Plug the power cords of the main unit and subwoofer into an AC power supply. . Press the iD SeT button on the back of the subwoofer with a small, pointed object for 5 seconds. • The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly. . . POWER TV POWER VOL/CONTROL TV CH AV SYNC DRC MUTE S.VOL O/AINPUT S/WLEVEL AUTO POWER MENU EXIT TOOLS INFO SOUND MODE DIMMER POWER TV POWER VOL/CONTROL TV CH AV SYNC DRC MUTE S.VOL O/AINPUT S/WLEVEL AUTO POWER MENU EXIT TOOLS INFO SOUND MODE DIMMER Before moving or installing the product, be sure to turn off the power and disconnect the power . STANDBYLINKWhile the main unit is powered off (STANDBY mode), press MUTe on the remote control for 5 seconds. The Power Indicator on the main unit lights off and on, then returns to STAnDby mode. The main unit and the subwoofer are now linked (connected). The Link indicator (Blue LED) on the subwoofer is turned on. You can enjoy better sound from the wireless subwoofer by selecting the sound field mode. ( See page 17 ) • • • cord. . If the main unit is powered off, the wireless subwoofer will be in the standby mode and the STANDBY LED on the upper side will come on after 30 seconds Link indicator (Blue LED) blinking. . If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (2.4GHz or 5.8GHz) near the system, some sound interruption may be heard due to interference. . The transmission distance of the wireless signal between the main unit and sub is about 33 ft., but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless si...