Instructions Kenwood, Modèle KTC-SR903
Fabricant : Kenwood Taille : 328.88 kb Nom Fichier : Langue d'enseignement:
Aller à la télécharger
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
For operations, see the page of the instruction manual of your control unit. What is displayed may partly depend on control units to be connected. Information (Upper Part Display) Channel Number & Channel Name Song Title & Artist Name Category Name ESN Channel Number Channel Number — 11 — Operations Operations Selecting the Press the [FM] button. instructions given below. Each time the button between the SR1, SR2, SR3 English Sirius ID [ESN] display You must have the Sirius ID number Sirius Corp. Check the Sirius ID [ESN] 1 Select the Sirius Satellite Radio Mode Press the [SRC] button. Select the "SIRIUS" display. 2 Check the Sirius ID [ESN] of this unit See the page of the instruction manual your control unit, and select the ESN menu item. The Sirius ID [ESN] will be displayed. Serial & Sirius ID [ESN] It is especially important to retain the unit serial number and the electronic Sirius Identification number for service activation and potential future service changes. Select Sirius Satellite Radio Mode Listening to the satellite radio. Press the [SRC] button. Select the "SIRIUS" display. • You need to subscribe to SIRIUS to receive the service by Sirius Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO SUBSCRIBE" appears. • It may take a little time to start receiving after you selected the SIRIUS source. • If the signal receiving fails, "Acquiring Signal" appears. Tuning Selecting the channel. Press the [ 4] or [ . ] button. Preset Tuning Calling up the channels in the memory. 1 Select the preset band Press the [FM] button. 2 Call up the channel Press the [1] — [4] button. The channels are called up as shown below. Press button Call up number No.1 j No.5 [1/5] [2/6] No.2 j No. 6 [3] No.3 [4] No.4 Each time the button is pressed, the called up channel switches cyclically. — 12 — Channel Preset Channel Preset Putting the channel 1 Select the preset band Press the [FM] button. 2 Enter Memory mode Press the [P.M] button for at least 1 second. "Preset Memory" is displayed. 3 Select the channel to put in the memory Press the [ 4] or [ . ] button. 4 Select the preset number Press the [FM] or [AM] button. 5 Put the channel in the memory Press the [P.M] button for at least 2 seconds. The preset number display blinks 1 time. 6 Repeating steps 3 to 5 and putting the desired channel in the memory. On each band, 1 channel can be put in the memory on each [1] — [6]. 7 Exit Memory mode Press the [P.M] button. • Only the channel number is stored. Category information is not stored. • You can set up to 6 memories even on a control unit with 8 preset buttons. Every receivable Channel 1 Select a scan item from 2 Start Channel Scan Press the [ 4] or [ . ] button for at least 1 second. The channel scan will start. 3 Release it when the channel you want Press the [ 4] or [ . ] ...
Ce manuel est également adapté pour les modèles :
Unité - SIRIUS KTC-SR903 (328.87 kb)
Écrivez votre propre critique du dispositif
)
