Évaluations - 4, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Switching back to the previous setting Press the B. BOOST (BASS BOOST) key again. Normal playback Recording Recording audio (analog sources) Muting the sound MONITOR The MUTE key lets you mute the sound of the speakers. Press the MUTE key. SP MUTE A L SW R INPUT SELECTOR Blinks To cancel Press the MUTE key again so that the “MUTE” indicator goes off. • MUTE ON can also be deactivated by turning the volume control knob. SOURCE DIRECT playback (for analog input sources only) Use this function to pass the source material direct to the amplifier, bypassing any audio processing. Press the SOURCE DIRECT key. S.DIRECT • When you press the LISTEN MODE, SOUND, or SET UP keys, or switch to another input source, SOURCE DIRECT playback will be canceled. • If CINEMA EQ. is switched ON, SOURCE DIRECT key will not be efffective. To cancel Press the SOURCE DIRECT key again. • If SOURCE DIRECT playback was activated while in a surround mode, canceling SOURCE DIRECT playback will reactivate the previous surround mode. Listening with headphones 1 (KRF-V6050D) Press the SPEAKERS A or B key so that the speaker indicator goes off. (KRF-V5050D) Press the SPEAKER key so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off. Make sure the SP indicators are turned off. SP A ASP KRF-V6050D KRF-V5050D • If you turn off all of the speakers when in the surround mode, the surround mode will be canceled as well, resulting in stereo playback. 2 Connect the headphones to the PHONES jack. PHONES Recording a music source When recording a music source, switch the VIDEO2/MONITOR setting to “MONITOR”. 8 1 Use the INPUT SELECTOR knob to select the source (other than “MD/TAPE”) you want to record. 2 Set the cassette deck or MD recorder to record. 3 Start playback, then start recording. Recording tapes or MD (with MONITOR function) When recording a music source, switch the VIDEO2/MONITOR setting to “MONITOR”. 8 MONITOR = MD/TAPE recording 1 Press the MONITOR key. STEREO MONITOR 2 Use the INPUT SELECTOR knob to select a source other than “MD/TAPE” 3 Start playback on the cassette deck connected to the MONITOR jacks and start recording on the cassette deck or MD recorder connected to the MD/TAPE jacks. MD/TAPE = MONITOR recording 1 Use the INPUT SELECTOR knob to select “MD/TAPE”. 2 Start playback on the cassette deck connected to the MD/TAPE jacks and start recording on the cassette deck or MD recorder connected to the VIDEO2/MONITOR jacks. • To copy tapes using a double cassette deck, refer to the instruction manual of the double cassette deck. MONITOR function (analog sources only) You can connect a cassette deck or graphic equalizer to the VIDEO2/ MONITOR jacks of the receiver. If a graphic equalizer is connected, the MONITOR key should be left in the on position. Alternately, if a cassette deck equipped with a 3-head system is connected to the VIDEO2/ MONITOR jacks, you will be able to monitor the just-recorded signal while making recordings on the cassette deck. By switching the MONITOR key on and off, you can compare the sound of the source signal and the just-recorded signal. For more information, refer to the instruction manual of the connected component. Operations 3 Use the VOLUME CONTROL knob (VOLUME keys) to adjust the volume. Recording Recording video 1 Use the INPUT SELECTOR to select the video source (other than “VIDEO1”) you want to record. 2 Set the video deck connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. 3 Start playback, then start recording. • Recording may not be normal for some video software. This is due to the copy guard condition. ° Recording audio (digital sources) Switch on the REC mode to record a digital input source. Usually use the A-REC (Auto-Record) mode to record audio input sources. When the digital mode changes during recording in the A- REC mode, the audio input source may be interrupted momentarily. Recording music in A-REC or M-REC mode DIMMER INPUT SELECTOR 1 Use the INPUT SELECTOR to select the source (CD, DVD, or VIDEO2) you want to record. 2 Set the cassette deck or MD to record. Operations 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode. • The mode changes every 2 seconds as shown below. 1 Rec mode off : The digital input record mode is switched off. 2 A-REC : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 M-REC : The input signal type at the moment this mode is selected is held throughout this mode. For A-REC mode: For M-REC mode: AUTO SOUND DIGITAL PRO LOGIC STEREO AUTO SOUND DIGITAL PRO LOGIC STEREO AUTO SOUND AUTO SOUNDAUTO SOUND DIGITAL PRO LOGIC DIGITAL STEREO GITAL AUTO SOUND AUTO SOUNDAUTO SOUND DIGITAL PRO LOGIC DIGITAL STEREO GITAL 4 Start playback, then start recording. • If the audio reproduction stops in the middle due to change in the input signals, etc., press the DIMMER key. L...
Ce manuel est également adapté pour les modèles :Récepteur et amplificateur - KRF-V5050D (2.17 mb)