• Frequency: frequency value corresponding to the selected transponder or entered manually using numerical keys. • Symbol Rate: symbol rate value corresponding to the selected transponder or entered manually using numerical keys. • Polarization: Hor (horizontal) or Ver (vertical) • Search options: select FTA to search for Free-To-Air channels, or FTA+Scram… for Free-To-Air and scrambled channels. • Search type: select TP to perform the search for a particular transponder, Network for a group of transponders or 1 Sat for all the transponders of a satellite. Note: information about the selected satellite is displayed on the right side of the screen. 7.7.3 Signal Test This feature is used to test the signal strength and quality. - Select Signal Test from the Installation menu to access the Signal Test screen. - Select values for the following: • Antenna: select your antenna number • Satellite: select the appropriate satellite using arrows keys • LNB Type: select your LNB type. If you use an universal LNB, select Universal • LNB Freq. 1: set automatically according to the satellite and LNB Type selected. If you have a dual LNB, enter the proper value in the value box. English MENU 29 English • LNB Freq. 2: set automatically according to the satellite and LNB Type selected. • Frequency: frequency value corresponding to the selected transponder or entered manually using numerical keys. • Symbol Rate: symbol rate value corresponding to the selected transponder or entered manually using numerical keys. • Polarization: Hor (horizontal) or Ver (vertical) As you enter values, you can view the signal strength and quality on the right-hand side of the screen. 7.7.4 Product Identifier This feature is used to provide hardware and software information. 7.7.5 Factory Default To reset your receiver back to the factory default condition, select Factory Default from the Installation sub-menu. The Factory Default screen appears, displaying a warning message. Press to confirm (selection is highlighted in yellow). Note: if you reset your receiver to factor y default settings, you lose all the data and information that was previously stored. 7.7.6 Software update This feature is used to set the software download mode and type. To manage software downloads: - Select Software update from the Installation sub-menu. - Select the appropriate values for the followings: • Select mode: Auto Mode or User Mode. It is recommended to set the update mode to Auto Mode. • Download Type: Software, Software+Data or Data • For instance, data is a preset list. - Press to launch a new software search. The software search screen appears, displaying the search progress and the new software version. 30 MENU Menu tree Guide Channel Manager Parental control (Pin Code required) Timer Manager Setup menu Channel POOL Favourites Parental control ON/OFF Menu lock ON/OFF Parental Rate New Pin Code Confirm Pin Code Record Timer End Time Timer Number Channel Name Timer Type Month Date Start Time Reminder Sleep Time 22KHz Tone Time Setting Timer Number Channel Name Timer Type Month Date Start Time Set Local Time Summer Time Year Month Date Time Menu Language Audio Language Subtitle language Screen Format TV Output Audio Output VCR Output Banner Timeout Antenna Setting Add Service Signal Test Product identifier Factory default Search Type System Setting Transparency Installation Software update DiSEqC Satellite LNB Type LNB Freq. 1 LNB Freq. 2 LNB Power DiSEqC Satellite Transponder Frequency Symbol Rate Polarization 22KHz Search Options MENU TREE 31 DiSEqC Satellite LNB Type LNB Freq. 1 LNB Freq. 2 Frequency Symbol Rate Polarization DiSEqC Satellite Frequency Symbol Rate Polarization Set PID Select mode Download Type English 9 Troubleshooting English Please be aware that new software may change the functionality of your receiver. Should you experience any difficulties with the operation of the receiver, please consult the relevant section of this manual, including this Troubleshooting section. If the problem cannot be solved, call your dealer or a customer service adviser. Symptom Cause Remedy The display on the front panel does not light up. Faulty power supply Check that the power cord is correctly connected. Disconnect this cord and reconnect it to ensure it is in place. Check that the power is available at the wall socket. No sound or picture but the front panel red light is on. Receiver in Standby Press the Standby button. No sound or picture but the front panel green light is on. Dish pointed incorrectly Adjust the dish pointing. Check the signal level from the Antenna Setup menu. Poor signal Check the connections at the LNB and between the LNB and the receiver, or adjust the dish. Receiver in TV mode Press on the remote control once or twice. Poor SCART connections Check the SCART connections Poor picture Incorrect dish pointing Adjust the dish pointing. The remote control does not operate your receiver. Make sure the receiver is on. Make ...
