Évaluations - 6, GPA: 4.5
(
)
)
|
Facilité d'utilisation
Switching the LISTEN switch between the original source and TAPE 1 during recording will then enable you to make a true ‘before’ and ‘after’ (A-B) comparison. You may listen to another input whilst recording on TAPE 1 by use of the LISTEN selector. RECORDING (TAPE 2) Use the LISTEN selector © to route the required signal to a cassette deck connected to the TAPE 2 RECORD OUT sockets © Set your tape recorder into its recording mode and the selected input will be recorded. To monitor the recording push the PROCESSOR/ TAPE 2 button in. If your tape recorder is a 3 head design, this will allow A-B monitoring of the actual recording while it is taking place. You may record another input on to TAPE 1 whilst recording on TAPE 2 by use of the SEND selector. ■ TAPE TO TAPE DUBBING: The Alpha 9C allows two way tape dubbing (copying) from TAPE 1 to TAPE 2 or vice versa. For example, to copy from a recorder connected to the TAPE 2 sockets to a recorder connected to TAPE 1, first switch the SEND selector on the Alpha 9C to TAPE 2. This routes the TAPE 2 signal to TAPE 1's output. Then set the first tape recorder into its 'record' mode and the second to 'playback' mode to enable the transfer to take place. If you wish to monitor the transfer while it is taking place switch LISTEN to TAPE 1. To record from TAPE 1 to TAPE 2 set LISTEN to TAPE 1. It does not matter what position the SEND selector is in. To monitor push the PROCESSOR/ TAPE 2 button in. REMOTE CONTROL FUNCTIONS ■ Your Alpha 9C preamplifier is supplied with the Arcam CR35 infra-red remote control handset, which has buttons to allow the simple operation of other products. It is supplied with 2 AA batteries - ensure these are inserted correctly. ■ The remote handset enables you to operate the LISTEN/ ZONE 1 SELECTOR, VOLUME and MUTE functions on the Alpha 9C. It also allows you to control some basic functions of an Arcam or Philips based CD player (except the Alpha One CD player, which uses a different remote control language) and a remote controlled tuner (such as the Alpha 8 tuner). ■ REMOTE MODE - The Alpha 9C is factory-set to enable the Arcam CR35 or Arcam CR200 System Remote automatically to synchronise the operation of any Arcam CD player or transport, and remote control tuner with the LISTEN/ZONE 1 SELECTOR on the Alpha 9C, all at the touch of a single button. For example, using the CR35 remote, press PLAY, and the CD player will start the disc and the LISTEN/ ZONE 1 switch of the Alpha 9C will select the CD input. If automatic operation is not required it can be disabled by your dealer by fitting an internal link. The LISTEN/ZONE 1 selector switch can still be operated by either remote control handset. ■ The MUTE button mutes the MAIN pre-amp outputs and the ZONE 1 & 2 preamp outputs. Both tape outputs and the headphone socket remain active. In MUTE mode the power LED will turn amber until mute is disabled by either pressing MUTE again or pressing the volume -/+ buttons on the handset. Note: The ‘STBY’, ‘DISP’ and ‘VCR’ buttons on the CR35 have no effect on the Alpha 9C preamplifier. The ‘DVD’ button will select the ‘AUX’ input. Guarantee Information GUARANTEE FOR UK SALES This equipment is guaranteed for two years from the date of purchase (parts and labour only), provided that it was originally purchased from an authorised dealer under a consumer sale agreement. (The words “consumer sale" shall be construed in accordance with Section 15 of the Supply Of Goods [Implied Terms] Act 1973). The manufacturer can accept no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under this guarantee. This guarantee is applicable within the UK only. It is transferable to subsequent purchasers, but the liability of the manufacturer is limited to the cost of repair of the defective parts and under no circumstances extends to consequential loss or damage. CLAIMS UNDER THIS GUARANTEE This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to Arcam. It should be sent carriage prepaid by a reputable carrier - NOT by post. No responsiblity can be accepted for the unit whilst in transit to the factory, or an agent, and customers are therefore advised to insure the unit against loss or damage whilst in transit. If the original packing is not available, replacement packing can be purchased from Arcam. DO NOT CONSIGN THE EQUIPMENT TO ARCAM UNLESS YOU HAVE BEEN SPECIFICALLY REQUESTED TO DO SO BY THE CUSTOMER SUPPORT DEPARTMENT. DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO DISASSEMBLE THE EQUIPMENT BEFORE DESPATCH. You can contact the manufacturer at the following address: ARCAM Customer Support Department, Pembroke Avenue, Denny Industrial Centre, Waterbeach, Cambridge, C...
Ce manuel est également adapté pour les modèles :Récepteur et amplificateur - PreAmplifier Alpha 9C (5.9 mb)