Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Throw-Back The throwing back of a workpiece usually caused by the workpiece being dropped into the blade or being placed inadvertently in contact with the blade. Workpiece or Material The item on which the operation is being done. Worktable Surface where the workpiece rests while performing acutting, drilling, planing, or sanding operation. FEATURES PRODUCT SPECIFICATIONS Feed Rate26 FPM No Load Speed10,000 RPM Motor2 HP Peak Input120 Volt, 60Hz, AC Only, 15 Amps Max Planing Height6 in. Max. Planing Width13 in. Max. Planing Depth1/8 in. Net Weight53.5 lbs. DEPTH ADJUSTMENT HANDLE SWITCH KEY DUST PORT POWER SWITCH WORK TABLE THICKNESS SCALE Fig. 2 FEATURES KNOW YOUR PLANER See Figure 2. Before attempting to use your portable planer, familiarize yourself with all the operating and safety requirements. 15 AMP MOTOR Your planer has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. AUTOMATIC FEED Infeed and outfeed rollers feed the wood through the planer. CUTTER HEAD ASSEMBLY The cutter head assembly controls the depth of cut. DEPTH ADJUSTMENT HANDLE The depth adjustment handle is used to raise and lower the cutter head assembly. DUST COLLECTION HOOD The dust collection hood features a quick flip-up dumping door and a 2-1/4 in. dust port for connecting to a shop vac. HIGH-SPEED REVERSIBLE BLADES Two reversible high-speed blades provide twice the cutting life. POWER SWITCH AND SWITCH KEY Your planer has an easy access power switch with a removable switch key. THICKNESS SCALE The thickness scale accurately displays the height of the cutter blades to a maximum of 6 in. WORK TABLE The work table supports your workpiece. LOOSE PARTS 2 3 6 5 1 4 Fig. 3 Key No. Description Qty. 1 Depth Adjustment Handle1 2 Screw1 3 Switch Key1 4 Magnetic Blade Wrench1 5 Hex Key1 6 Open-end Wrench1 ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Place it on a level work surface. NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected the tool, identified all loose parts, and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly iscomplete. Failure to comply could result in accidental starting and possible serious personal injury. OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: The use of this planer on materials not recommended may damage the planer and may cause serious personal injury. WARNING: Never plane a workpiece with loose knots or foreign objects. Do not plane workpieces that are severely bowed, twisted, or knotted. Cutter blades can dull, chip, or break, causing possible serious personal injury. WARNING: Do not force feed the workpiece through the machine. Let the planer apply the proper feed rate. APPLICATIONS You may use this tool for the purpose listed below: n Planing the surface of solid wood and wood products THICKNESS PLANING Thickness planing sizes the workpiece to a desired thickness while creating a smooth, level surface. The thickness of each cut will depend on the type of wood (hardwood versus softwood), width of workpiece, straightness, dryness, and grain composition. Whenever working with a new type of wood, make thin test cuts on a scrap piece of wood first to determine potential problems with the workpiece. PLANING TIPS n Thickness planers work best if at least one side of the workpiece has a flat surface. When both sides of a workpiece are rough, use a surface planer or jointer first to define the initial flat surface. Plane one side of the workpiece, then flip the workpiece and plane the surface of the reverse side. n Always plane both sides of a workpiece to reach the desired thickness. This will leave the workpiece with uniform moisture to prevent warping during the drying...