Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE 2 TABLE OF CONTENTS nIntroduction2 ..nGeneral Safety Rules3 ..nSpecific Safety Rules3-4 nSafety Rules for Charger5 ..nSymbols6-7 ....nFeatures8 ....nAssembly9 ..nOperation10-14 ..nMaintenance15 ..nParts Ordering / Service16 INTRODUCTION This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS n Know your tool. Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool. n Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. n Do not allow children or untrained individuals to use this unit. n Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. n Wear safety glasses or goggles that are marked to comply with ANSI Z87.1 standards and hearing protection when operating this unit. n Wear heavy long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, jewelry of any kind, or go barefoot. n Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. n Keep all bystanders, children, and pets at least 50 feet away. n Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. n Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the pole pruner in unexpected situations. Do not use on a ladder or unstable support. n Do not operate in poor lighting. n Keep all parts of your body away from any moving part. n Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired. n Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents. n Avoid dangerous environments. Do not use the attachment in damp or wet locations. Do not use in rain. n Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. n Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. n Keep the tool and its handle dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic. n Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool. n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES n Before you start the unit, make sure the blade is not contacting any object. n Stop the unit, remove the battery pack, and make sure the blade has stopped before setting the unit down. n Never cut any material with a diameter greater than 4 in. n To protect yourself from electrocution, do not operate within 50 feet of overhead electrical lines. n To protect yourself from falling branches, do not stand directly under the branch or limb being cut. This unit should not be held at an angle over 60° from ground level. n Replace any blade that has been damaged. Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious injury. SPECIFIC SAFETY RULES PRECAUTIONS AGAINST KICKBACK Kickback is a dangerous reaction that can lead to serious injury....