Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions Makita, Modèle RBC221

Fabricant : Makita
Taille : 3.66 mb
Nom Fichier :
Langue d'enseignement: enfr
Aller à la télécharger



Facilité d'utilisation


spindle speed 1/min 8,800 7,000 Maximum spindle speed (corresponding) 1/min 6,000 7,000 Fuel consumption kg/h 0.54 0.53 Specific fuel consumption g/kWh 735 725 Idling speed 1/min 2,600 Clutch engagement speed 1/min 3,600 Carburetter (Diaphragm-carburetter) type WALBRO WYL Ignition system type Solid state ignition Spark plug type NGK BM7A Electrode gap mm 0.6 - - 0.7 Right handle Idling m/s2 2.6 — 4.2 3.8 Vibration per (Rear grip) Racing or W.O.T m/s2 4.5 — 9.0 9.6 ISO 7916” Left handle Idling m/s2 3.2 — 6.3 9.0 (Front grip) Racing or W.O.T m/s2 4.6 — 9.6 8.7 Sound pressure level average to ISO 791711 db (A) 91.5 — 94.7 95.7 Sound power level average to ISO 108841) db (A) 102.0 — 105.0 106.0 Mixture ratio (Fuel: MAKITA 2-stroke oil) 50 : 1 Gear ratio 13/19 — 1) The data take equally into account the idling and racing or wide open slottle speed operating modes. 2) Some machines with U handle are not in compliance with CEN standard. Machines with Loop handle are not in compliance with CEN standard. Machines with J handle are in compliance with CEN standard. (CE label is put on machines with are in compliance with CEN standard). 8 DESIGNATION OF PARTS RBC220 I RBC250 RBC221/RBC251 J handle type GB | DESIGNATION OF PARTS 1 Fuel Tank 2 Recoil Starter 3 An Cleaner 4 ON-OFF Switch 5 SparkPlug 6 Muffler 7 Holder Case 8 Rear Grip 9 Hanger 10 Handle 11 Throttle Lever 12 Throttle Cable 13 Drive Shaft 14 Protector 15 Gear Case / Head Case 16 Handle Joint 17 Brush Blade 18 Nylon Cutting Head 19 Waist Pad 20 Fuel Tank Cap 21 Starter Knob 22 Primer Pump 23 Choke Lever 24 Exhaust Pipe 25 Shoulder Strap Assembling of engine and drive shaft A Insert the bullet connectors (10) through the holes in the cover (11' -(12) For machine with J handle • Always pass the throttle wire through the hole in the undersic of the rear grip (12). NOTE: Loose throttle wire will disturb you in operation. If it is caught ar pulled by something, engine rpm will increase unexpectedly. GB Mounting of handle •Connect the throttle wire and firmly close the cable joint. • Squeeze the throttle lever to make sure that the throttle wire rr smoothly. •Connect the switch cords to the two cords from the engir inserting one into the other. > Insert the bullet connectors (10) through the holes in the cove A Ce manuel est également adapté pour les modèles :
Outils de jardin - RBC220 (3.66 mb)
Outils de jardin - RST250 (3.66 mb)
Outils de jardin - RBC250 (3.66 mb)
Outils de jardin - RBC251 (3.66 mb)


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories