|
Facilité d'utilisation
When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of ! equipment. Be Aware of Signal Words A Signal word designates a degree or level of hazard seriousness. The signal words are: ! DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded. For Your Protection Thoroughly read and understand the “Safety Label” section, read all instructions noted on them. ! WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices. ! CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. Shutdown and Storage Lower machine to ground, put tractor in park, turn off engine, and remove the key. Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports. OFF REMOVE 12/28/05 RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M 1 Table of Contents Land Pride Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Use Safety Lights and Devices Slow moving tractors, self- propelled equipment, and towed implements can create a hazard when driven on public roads. They are difficult to see, especially at night. Flashing warning lights and turn signals are recommended whenever driving on public roads. Use lights and devices provided with implement. Transport Machinery Safely Comply with state and local laws. Maximum transport speed for implement is 20 mph. DO NOT EXCEED. Never travel at a speed which does not allow adequate control of steering and stopping. Some rough terrain require a slower speed. Sudden braking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped with brakes. Use the following maximum speed - tow load weight ratios as a guideline: 20 mph when weight is less than or equal to the weight of tractor. 10 mph when weight is double the weight of tractor. IMPORTANT: Do not tow a load that is more than double the weight of tractor. Use A Safety Chain A safety chain will help control drawn machinery should it separate from the tractor drawbar. Use a chain with the strength rating equal to or greater than the gross weight of the towed machinery. Attach the chain to the tractor drawbar support or other specified anchor location. Allow only enough slack in the chain to permit turning. Do not use safety chain for towing. Practice Safe Maintenance Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information. Work in a clean dry area. Lower the implement to the ground, put tractor in park, turn off engine, and remove key before performing maintenance. Allow implement to cool completely. Do not grease or oil implement while it is in operation. Inspect all parts. Make sure parts are in good condition & installed properly. Remove buildup of grease, oil or debris. Remove all tools and unused parts from implement before operation. 2 RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M 12/28/05 Land Pride Table of Contents Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Prepare for Emergencies Be prepared if a fire starts. Keep a first aid kit and fire extinguisher handy. Keep emergency numbers for doctor, ambulance, hospital and fire department near phone. 911 Keep Riders Off Machinery Riders obstruct the operator’s view they could be struck by foreign objects or thrown from the machine. Never allow children to operate equipment. Wear Protective Equipment Protective clothing and equipment should be worn. Wear clothing and equipment appropriate for the job. Avoid loose fitting clothing. Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear suitable hearing protection such as earmuffs or earplugs. Operating equipment safely requires the full attention of the operator. Avoid wearing radio headphones while operating machinery. Avoid High Pressure Fluids Hazard Escaping fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic lines. Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks. Wear prot...
Ce manuel est également adapté pour les modèles :Outils de jardin - RCR1542 (2.66 mb)
Outils de jardin - RCR1560 (2.66 mb)
Outils de jardin - RCR1572 (2.66 mb)