Log:
Évaluations - 3, GPA: 3.7 ( )

Instructions Ryobi, Modèle RY30921

Fabricant : Ryobi
Taille : 2.87 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


outdoor products. EMISSIONS PARTS LIST MANUFACTURER’S WARRANTY COVERAGE: Emissions parts vary from product to product. Your emissions control system warranty This product’s emissions control system is warranted for two years. If any emis-applies to any of the following components that may be included on your product: sion-related part on your engine is defective, the part will be repaired or replaced by (1) Fuel Metering System Techtronic Industries North America, Inc., free of charge. (i) Carburetor and internal parts (and/or pressure regulator or fuel injection OWNER’S WARRANTY RESPONSIBILITIES system). (a) As the non-road or small off-road engine owner, you are responsible for (ii) Air/fuel ratio feedback and control system. the performance of the required maintenance listed in your operator’s manual. (iii) Cold start enrichment system. Techtronic Industries North America, Inc., recommends that you retain all re( iv) Fuel Tank. ceipts covering maintenance on your non-road or small off-road engine, but (2) Air Induction System Techtronic Industries North America, Inc., cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled (i) Controlled hot air intake system. maintenance. Any replacement part or service that is equivalent in performance (ii) Intake manifold. and durability may be used in non-warranty maintenance or repairs, and shall (iii) Air filter. not reduce the warranty obligations of Techtronic Industries North America, Inc. (3) Ignition System (b) As the non-road or small off-road engine owner, you should be aware, however, (i) Spark Plugs. that Techtronic Industries North America, Inc., may deny you warranty coverage if (ii) Magneto or electronic ignition system. your non-road or small off-road engine or a part has failed due to abuse, neglect, (iii) Spark advance/retard system. improper maintenance, or unapproved modifications. (4) Exhaust Gas Recirculation (EGR) System (c) You are responsible for presenting your non-road or small off-road engine to an authorized service dealer as soon as a problem exists. The warranty repairs should (i) EGR valve body and carburetor spacer, if applicable. be completed in a reasonable amount of time, not to exceed 30 days. (ii) EGR rate feedback and control system. If you have any questions regarding your warranty rights and responsibilities, you (5) Air Injection System should contact a Techtronic Industries North America, Inc., Customer Representa (i) Air pump or pulse valve. tive at 1-800-860-4050. (ii) Valves affecting distribution of flow. DEFECT WARRANTY COVERAGE REQUIREMENTS: (iii) Distribution manifold. (a) The warranty period begins on the date the engine or equipment is delivered to (6) Catalyst or Thermal Reactor Systeman ultimate purchaser. (i) Catalytic converter. (b) General Emissions Warranty Coverage. Techtronic Industries North America, (ii) Thermal reactor. Inc., warrants to the ultimate purchaser and each subsequent purchaser that your (iii) Exhaust manifold. non-road or small off-road engine is designed, built, and equipped at the time of sale to conform with all applicable regulations adopted by the California Air Resources (7) Particulate Controls Board or the United States Environmental Protection Agency; and that it is free from (i) Traps, filters, precipitators, and any other device used to capture particulate defects in materials and workmanship which cause the engine to fail to conform with emissions. applicable regulations for a period of two years from the date the non-road or small (8) Miscellaneous Items Used in Above Systems off-road engine is purchased by the initial purchaser. (i) Electronic controls. (c) The warranty on emissions-related parts will be interpreted as follows: Any (ii) Vacuum, temperature, and time sensitive valves and switches. warranted part that is not scheduled for replacement as required in the Emissions (iii) Hoses, belts, connectors, and assemblies. Maintenance Schedule and Warranty Parts List set forth below is warranted for two Techtronic Industries North America, Inc., will furnish with each new engine written years. If any such part (including any part that is scheduled only for regular inspection) instructions for its maintenance and use by the owner. fails during the period of warranty coverage, it will be repaired or replaced at any RYOBI® Authorized Service Center at no charge. Any such part repaired or replaced The Emissions Compliance Period referred to on the Emissions Compliance label under warranty will be warranted for the remaining warranty period. A statement to indicates the number of operating hours for which the engine has been shown to the effect of “repair or replace as necessary” would not reduce the period of war-meet Federal emission requirements. Category C=50 hours, B=125 hours, and ranty coverage. Any warranted part that is scheduled for replacement as required A=300 hours. maintenance in the Emissions Maintenance Sched...

Ce manuel est également adapté pour les modèles :
Outils de jardin - RY30520 (2.87 mb)
Outils de jardin - RY30540 (2.87 mb)
Outils de jardin - RY30941CS30 (2.87 mb)
Outils de jardin - RY30961 (2.87 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories