Évaluations - 3, GPA: 4.7 ( )

Fabricant : MTD Taille : 1.32 mb Nom Fichier : Langue d'enseignement:

LEVER The P.T.O. lever is located on the right hand side of the tractor. The tines are engaged by lifting the P.T.O. lever to the "Engaged" position. Lower the P.T.O. lever to the "Disengaged" position to stop the tine rotation. ADJUSTMENT FERRULE The ferrule on the lift rod assembly provides tilling depth adjustment. Move the ferrule toward the front of the tractor (end of the rod) for deeper tilling depth. Move it further back on the rod to till shallower. MAINTENANCE CHAIN CASE LUBRICATION The chain case is sealed at the factory and does not require checking or changing. If the chain case is disassembled for repair, replace the grease with 20 ounces of plastilube "0" grade grease (part number 737-0133, 14 ounce container). BEARING CUP At least once a season, remove the bearing cup on the right hand side of tiller housing. Clean and refill with 2 ounces of plastilube "0" grade grease (part number 737-0133). LIMITED TORQUE PULLEY If the limited torque clutch is disassembled for any reason, reassemble as shown on page 12. Torque setting is 350 in. lbs. 9 Model 746 and 19746 LIFT LEVER <7 42 10 Model 746 PARTS LIST FOR MODEL 746 28" Tl LLER ATTACHMENT REF. NO. PART NO. DESCRIPTION NEW PART REF. NO. PART NO. DESCRIPTION NEW PART 1 710-0696 Hex Bolt 3/8-24 x .88" Lg.* 30 721-0133 Gasket for Brg. Housing 2 736-0217 L.-Wash. 3/8" I.D. Heavy Duty 31 736-0246 Fl.-Wash. 1.25" I.D. x 2.00" O.D. 3 712-0241 Hex Nut 3/8-24 Thd.* x .06 4 710-0624 Hex Bolt 5/16-24 x 1.50" Lg.* 32 738-0630 Tine Shaft R.D. 1.25" Dia. x 5 712-0123 Hex Nut 5/16-24 Thd.* 6.25" Lg. N 6 736-0119 L.-Wash. 5/16" I.D.* 33 741-0417 Bearing Housing w/Bearing 7 710-0117 Hex Bolt 5/16-24 x 1.00" Lg.* 34 712-0241 Hex Nut 3/8-24 Thd.* 8 732-0185 Extension Spring .56" O.D. x 35 736-0217 L.-Wash. 3/8" I.D. Heavy Duty 7.75" Lg. 36 784-0107 Tine Adapter Ass'y- N 9 711-0770 Adjustment Ferrule 1/2-13 37 710-0459 Hex Bolt 3/8-24 x 1.50" Lg.* Thd. 38 742-0243 Tine 14" x 5/16" 10 736-0187 Fl.-Wash. .640" I.D. x 1.24" 39 710-0331 Hex Bolt 3/8-24 x 2.25" Lg,* O.D. x .060 40 742-0244 Tine 14" x 5/16" 11 714-0145 Intern. Cotter Pin 1/2" Dia. 41 712-0158 Hex Cent. L.-Nut 5/16-18Thd. 12 736-0272 Fl.-Wash. .510" I.D. x 1.0" 42 736-0119 L.-Wash. 5/16" I.D.* O.D. x .060 43 884-0061 Chain Case Ass'y. Comp. 13 784-0050 Lift Rod Assy- 39.0" Lg. 44 710-0604 Hex Wash. TT Tap. Scr. 14 732-0460 Compression Spring 1.50" O.D. 5/16-18 x .62" Lg. x 15.0" Lg. 45 710-0564 Hex Bolt 1/4-20x 2.75" Lg.* 15 736-0208 Fl.-Wash. .51" I.D. x 1.50" 46 784-0076 Tine Shield - Hinge Flap O.D. x .075 Ass'y- 30" 16 784-0063 Pivot Bracket Assembly 47 747-0479 Tiller Flap Rod 1/4" Dia. x 17 784-0056 Tiller Housing Plate-R.H. 29.7" Lg. 18 736-0119 L.-Wash. 5/16" I.D.*' 48 714-0115 Cotter Pin 1/8" Dia. x 1.00" 19 712-0123 Hex Nut 5/16-24 Thd.* Lg.* 20 784-0058 End Cover - Tine Shield- 49 784-0074 Tine Shield Ass'y. 30" Lg. R.H. 50 784-0060 Reinforcement Brk't.-Tine Shield 21 784-0069 Tine Shield Hinge Flap 51 784-0055 Tiller Housing Plate Ass'y. Support 52 721-0192 Oil Seal Double Lip-1-1/4" Shaft 22 710-0157 Hex Bolt 5/16-24 x .75" 53 712-0287 Hex Nut 1/4-20 Thd.* Lg.* 54 736-0329 L.-Wash. 1/4" I.D.* 23 710-0237 Hex Bolt 5/16-24 x .62" 55 750-0599 Spacer .28" I.D. x .62" O.D. x Lg.* .90" Lg. 24 12541 Chute Pivot Bracket 56 710-0592 Hex Bolt 1/2-13 x 1.00" Lg.* 25 712-0158 Hex Cent. L-Nut 5/16-18 58 736-0921 L.-Wash. 1/2" I.D.* Thd. 59 712-0206 Hex Nut 1/2-13 Thd.* 26 736-0119 L.-Wash. 5/16" I.D.* 60 711-0212 Spacer .50" I.D. x 1.00" O.D. 27 710-0376 Hex Bolt 5/16-18 x 1.0" x .50" Lg. Lg. (Grade 5) 61 784-0073 Idler Bracket Support Arm 28 784-0068 Grease Housing Cup Ass'y. 29 714-0470 Cotter Pin 1/8" Dia. x 1.25" Lg.* 62 784-0064 Pivot Bracket Support 11 Model 746 and 19746 12 Model 746 and 19746 PARTS LIST FOR CHAIN CASE ASSEMBLY COMPLETE 884-0061 REF. NO. PART NO. DESCRIPTION NEW PART REF. NO. PART NO. DESCRIPTION NEW PART 1 05034 Bearing Housing 1-3/8" Dia. 32 737-0133 Grease - Plastilube #0 2 710-0371 Hex Bolt 5/16-18 x .88" Lg. (Not Shown) Spec. 33 737-0175 Vent Plug 3 710-0442 Hex Bolt 5/16-18 x 1.50" Lg.* 34 738-0181 Jack Shaft .525" I.D. x 7.78" 4 710-0564 Hex Bolt 1/4-20 x 2.75" Lg.* Lg. 5 710-0599 Hex Wash. S-Tap. Scr. 1/4-20 x 35 738-0594 Sprocket Shaft .63" Dia. x 5.0" .50" Lg. Lg. 6 710-0606 Hex Bolt 1/4-20 x 1.50" Lg.* 36 741-0155 Ball Brg. .62" I.D. x 1.38" O.D. 7 710-0693 Hex Bolt 3/8-16 x 4.5" Lg. 37 741-0417 Bearing Housing - 1-1/4" N 8 710-0778 Hex Wash. Hd. Bolt 1/4-20 x 38 748-0229 Hex Flange Brg. 1.5" Lg. 39 750-0563 Spacer 1.25" I.D. x 2.0" O.D. N 9 710-0909 Hex Wash. TT-Tap Scr. 5/16- 40 750-0599 Spacer .28" I.D. x .62" O.D. x 18 x 1.75" Lg. .90" Lg. 10 712-0158 Hex Cent. L.-Nut 5/16-18 Thd. 41 750-0600 Spacer .38" I.D. x .62" O.D. x 11 7...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :