Évaluations - 5, GPA: 4.2
(
)
)
|
Facilité d'utilisation
• Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine. MAINTENANCE AND STORAGE • Keep machine, attachments, and accessories in safe working condition. • Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equip ment is in safe working condition. • Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure. • Always refer to the operator’s guide instructions for im portant details if the tiller is to be stored for an extended period. - IMPORTANT CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRIT I CAL IN FOR MATION IN THIS MANUAL. IMPORTANT: USED TO ALERT YOU THAT THERE IS A POS SI BIL I TY OF DAM AGING THIS EQUIP MENT. NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions. Look for this symbol to point out important safety precautions. It means CAUTION!!! BE COME ALERT!!! YOUR SAFE TY IS INVOLVED. CAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug in order to prevent ac ci den tal starting when setting up, trans port ing, adjusting or making re pairs. WARNING The engine exhaust from this product con tains chemi cals known to the State of Cal i for nia to cause cancer, birth defects, or other reproductive harm. 2 PRODUCT SPECIFICATIONS Gasolina Capacity: 3 Quarts (2.8L) Unleaded Reg u lar Oil (API-SG-SL): (Capacity: 20 oz./0.6L) SAE 30 (Above 40°F/4°C) SAE 5W-30 (Below 40°F/4°C) Spark Plug : (Gap: .030"/0.76mm) Champion RC12YC CONGRATULATIONS on your purchase of a new tiller. It has been designed, en gi neered and manu fac tured to give you the best pos sible de penda bil ity and per formance. Should you experience any problems you can not easily remedy, please contact your nearest authorized service center. We have com pe tent, well-trained tech ni cians and the proper tools to service or repair this unit. Please read and retain this manual. The in struc tions will enable you to assemble and main tain your tiller prop erly. Always observe the “SAFETY RULES”. CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tiller. • Followinstructions under “Maintenance”and “Storage” sections of this Owner’s Manual. WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California, a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See your authorized service center/ DEPARTMENT for spark arrester. TABLE OF CONTENTS SAFETY RULES..........................................................2 CUSTOMER RESPONSIBILITIES...............................3 PRODUCT SPECIFICATIONS.....................................3 ASSEMBLY...............................................................4-6 OPERATION ...........................................................7-10 MAINTENANCE SCHEDULE ....................................11 MAINTENANCE ...................................................11-13 SERVICE & ADJUSTMENTS ...............................14-17 STORAGE ..................................................................18 TROUBLESHOOTING ...............................................19 WARRANTY...............................................................21 3 ASSEMBLY Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) Utility knife (1) Tire pressure gauge (1) Pair of pliers (1) 9/16" wrench OPERATOR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the operating position (standing behind tiller handles). FRONT OPERATOR’S POSITION LEFT RIGHT FIG. 1 CONTENTS OF HARDWARE PACK (1) Carriage Bolt 3/8-16 UNC x 1 Grade 5 (1) Center Locknut 3/8-16 UNC (2) Handle Locks (1) Hairpin Clip(1) Handle Lock Lever(1) Flat Washer 13/32 x 1 x 11 Gauge (1) Pivot Bolt 3/8-16 UNC Grade 5 Extra Shear Pins & Clips 4 5 ASSEMBLY •...