Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
OTHER STATES MAY HAVE SIMILAR LAWS. FEDERAL LAWS APPLY ON FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE CENTER/DEPARTMENT FOR SPARK ARRESTER. TABLE OF CONTENTS SAFETY RULES ............................................................ 2 PRODUCT SPECIFICATIONS ....................................... 3 CUSTOMER RESPONSIBILITIES ................................. 3 ASSEMBLY .................................................................4-5 OPERATION .............................................................6-10 MAINTENANCE SCHEDULE ...................................... 11 MAINTENANCE ..................................................... 10-13 SERVICE & ADJUSTMENTS .................................14-16 STORAGE .................................................................... 16 TROUBLESHOOTING ................................................. 17 PARTS ..................................................................... 18-31 WARRANTY ............................................................ 32-33 PARTS AND SERVICE ................................................34 3 4 OPERATOR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the operating position (standing behind tiller handles). TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) Utility knife (1) Tire pressure gauge (1) Pair of pliers (1) 9/16" wrench Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. Fig. 1 Fig. 2 FRONT OPERATOR’S POSITION LEFT RIGHT ASSEMBLY HANDLE ASSEMBLY SHIFT ROD UNPACKING CARTON (See Fig. 2) CAUTION: Be careful of exposed sta ples when handling or disposing of cartoning material. IMPORTANT: WHEN UN PACK ING AND AS SEM BLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLES. • While holding handle assembly, cut cable ties se cur ing handle assembly to top frame. Let handle assembly rest on tiller. • Remove top frame of carton. • Slowly ease handle assembly up and place on top of carton. • Cut down right hand front and right hand rear cor ners of carton. Lay side carton wall down. • Remove packing material from handle assembly. (1) Hairpin Clip (1) Carriage Bolt 3/8-16 UNC x 1 Grade 5 (1) Center Locknut 3/8-16 UNC (1) Flat Washer 13/32 x 1 x 11 Gauge (1) Handle Lock Lever CONTENTS OF HARDWARE PACK (2) Handle Locks (1) Pivot Bolt 3/8-16 UNC Grade 5 Extra Shear Pins & Clips ASSEMBLY INSTALL HANDLE (See Figs. 3, 4, and 5) • Insert one handle lock (with teeth facing outward) in gearcase notch. (Apply grease on smooth side of handle lock to aid in keeping lock in place until handle assembly is lowered into position.) VIEWED FROM R.H. SIDE OF TILLER Fig. 3 HANDLE LOCK HANDLE ASSEMBLY GEARCASE NOTCH SILVER HANDLE GEARCASE Fig. 5 handles_34 LOCK FLAT WASHER HANDLE BASE SLOT REAR CARRIAGE BOLT HANDLE LOCK LEVER LOCKNUTS PIVOT BOLT CONNECT SHIFT ROD (See Fig. 6) • Insert end of...
Ce manuel est également adapté pour les modèles :Outils de jardin - 21547000 (2.18 mb)
Outils de jardin - 21547000 (2.18 mb)
Outils de jardin - 21547000 (2.18 mb)
Outils de jardin - 21547000 (2.18 mb)