Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
S Cut from your left to your right. Cutting on the right side of the shield will throw debris away from the operator. S Always use the handlebar and a properly adjusted shoulder strap with blade (see ASSEMBLY instructions in brushcutter attachment instruction manual). CULTIVATOR SAFETY WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the engine and disconnect the spark plug before unclogging tines or making repairs. WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc. S Avoid heavy contact with solid objects that might stop the tines. If heavy contact occurs, stop the engine and inspect the unit for damage. S Never operate the cultivator without the tine cover in place and properly secured. S Keep the tines and guard clear of debris. S After striking a foreign object, stop the engine, disconnect the spark plug and inspect the cultivator for damage. Repair before restarting. S Disconnect attachment from the drive engine before cleaning the tines with a hose and water to remove any build- --up. Oil the tines to prevent rust. S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use. S Do not run unit at high speed unless cultivating. HEDGE TRIMMER SAFETY DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE - --Blade moves momentarily after the trigger is released or engine is turned off. Do not attempt to clear away cut material when the blade is in motion. Make sure engine is stopped, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade. WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation. S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by your authorized service dealer. S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade. S Keep the cutting blade and air vents clear of debris. SNOW THROWER SAFETY WARNING: Keep hands and feet away from the rotor when starting or running the engine. Never attempt to clear the rotor with the engine/motor running. Stop engine and disconnect spark plug before unclogging snow or debris from discharge chute or when adjusting vanes. 8 WARNING: Never lean over discharge chute. Rocks or debris could be thrown into the eyes and face and cause serious injury or blindness. WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow - --be alert for the possibility. S Direct material discharge away from glass enclosures, automobiles, etc. S Do not run engine at high speed while not removing snow. S Be attentive when using the snowthrower, and stay alert for holes in the terrain and other hidden hazards. S Make sure the rotor will spin freely before attaching the snowthrower to the powerhead. S If the rotor will not rotate freely due to frozen ice, thaw the unit before thoroughly before attempting to operate under power. S Keep the rotor clear of debris. S Do not throw snow near other people. The snow thrower could propel small objects at high speed causing injury. S After striking a foreign object, stop the engine, disconnect spark plug and inspect the snowthrower for damage and repair if necessary before restarting unit. S Never operate the snowthrower near glass enclosures, automobiles and trucks. S Never attempt to use the snowthrower on a roof. S Never operate the snowthrower near window wells, dropoffs, etc. S Never discharge snow onto public roads or near moving traffic. S Clear snow from slopes by going up and down; never across. Use caution when changing directions. Never clear snow from steep slopes. S Let snowthrower run for a few minutes after clearing snow so moving parts do not freeze. S Look behind and use care when backing up. Exercise caution to avoid slipping or falling, especially when operating in reverse. S Know how to stop quickly. ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use damaged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank. Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer. TOOLS REQUIRED S Hex wrench (provided) INSTALLING PRUNER ATTACHMENT CAUTION: When removing or installing at tachments, place the unit on a flat surface for stability. 1. Loosen the coupler by turning the knob counterclockwise. Knob...
Ce manuel est également adapté pour les modèles :Outils de jardin - 952711924 (337.52 kb)
Outils de jardin - PP250PT (337.52 kb)