Fuel leakage may lead to fire. If any leakage is detected during inspection, replace the oil pipe immediately. Fuel pipe INSPECTION OF BOLTS, NUTS AND SCREWS – Retighten loose bolts, nuts, etc. – Check for fuel and oil leakage. – Replace damaged parts with new ones for safety operation. CLEANING OF PARTS – Keep the engine always clean. – Keep the cylinder fins free of dust or dirt. Dust or dirt adhering to the fins will cause piston seizure. REPLACEMENT OF GASKETS AND PACKINGS In reassembling af

Always wear protective gloves! CAUTION: Start the Petrol Brushcutter only after having assembled it completely. For machines with bike handle models – Loosen knob (1). – Place handle (4) between handle clamp (2) and handle holder (3). – Adjust handle (4) to an angle that provides a comfortable working position and then secure by firmly hand-tightening knob (1). CAUTION: Do not forget to mount spring (5). MOUNTING OF HANDLE For machines with loop handle – Fix a barrier to the left side of the mac

Engine stops soon Engine speed does not increase Insufficient warm-up Perform warm-up operation Choke lever is set to “CLOSE” although engine is warmed up. Set to “OPEN” Clogged fuel filter Clean Contaminated or clogged air cleaner Clean Abnormal carburetor Make request for inspection and maintenance. Abnormal drive system Make request for inspection and maintenance. Cutter blade does not rotate Loosened cutter blade-tightening nut Tighten securely Twigs caught by cutter blade or dispersion- pre

– Open the choke lever progressively while checking the engine operation. Be sure to open the choke lever to the full in the end. – In cold or when the engine is cooled down, never open the choke lever suddenly. Otherwise, the engine may stop. 7) Warm-up operation Continue warm-up operation for 2 to 3 minutes. OPEN CLOSE Carburetor Primer Pump Note: – If the starter handle is pulled repeatedly when the choke lever remains at “CLOSE” position, the engine will not start easily due to excessive fue

We have the longest experience in the business, and every DOLMAR hedge trimmer benefits from that experience. The HT- 556 D and HT- 576 E models are especially handy and robust hedge trimmers, with plenty of performance and a good power-to-weight ratio. The ergonomic design of the grips and controls make for comfortable and untiring operation during extensive jobs. The safety features of the HT- 556 D and HT- 576 E hedge trimmers are the current state of the art and comply with all national and

– While keeping the engine level, remove the oil gauge, and confirm that the oil is filled within the upper and lower limit marks. When the oil is in short in such a way that the oil gauge touches the oil only by its tip, in particular with the oil gauge remaining inserted in the crankcase without screwing-in (Fig. 1), refill new oil near the port (Fig. 2). – For reference, the oil refill time is about 10h (10 times or 10 tanks of oil refill). – If the oil changes in color or mixes with dirt, re

Disposal of oil is regulated by law. In disposal, always follow the relevant laws and regulations. For any points remaining unknown, contact Authorized Service Agent. – Oil will deteriorate even when it is kept unused. Perform inspection and replacement at regular intervals (replace with new oil every 6 months). CLEANING OF AIR CLEANER DANGER: INFLAMMABLES STRICTLY PROHIBITED Interval of Cleaning and Inspection: Daily (every 10 operating hours) – Turn the choke lever to the full close side, and

As the engine owner, you should however be aware that the MAKITA may deny your warranty coverage if your engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications. You are responsible for presenting your engine to the nearest MAKITA Factory Service Center or service center authorized by MAKITA when a problem exists. If you have any questions regarding your warranty rights and responsibilities, you should contact the Makita Warranty Service Department at

- Change the place before starting the engine (at least 3 meters from the place of refuelling) (6). - Fuel cannot be stored for an unlimited period of time. Buy only as much as will be consumed in the near future. - Use only approved and marked containers for the transport and storage of fuel. Ensure children have no access to fuel. Putting into operation . Do not work alone. Another person must be nearby in case of emergencies (within shouting distance). . Children and other persons must remain

Importante: Leer cuidadosamente este manual de instrucciones antes de poner en marcha la maquina y observar estrictamente las normes de seguridad. Conservar este manual de instrucciones con cuidado. Brush Cutter Debroussailleuse Desbrozadora MS-260 U MS-261 U MS-330 U MS-331 U String Trimmer Taille-bordures Cortabordes MS-230 C MS-231 C MS-260 C MS-261 C MS-330 C MS-331 C ENGLISH Thank you very much for purchasing DOLMAR Brush Cutter/String Trimmer. We are pleased to recommend to you the DOLMAR