SHEET DESCRIPTION QTY/PER KEY PART NO. SHEET DESCRIPTION 7 1 C100005 1 HONDA 5.5 hp ENGINE w/DEFLECTOR 1 C100114 1 HONDA 8.0hp ENGINE w/DEFLECTOR 2 C100028 1 PULLEY w/ HUB & BOLTS, 4" x 22mm 3 C100024 1 B56 V-BELT, 5.5hp MODEL 3 C100113 1 B59 V-BELT, 8.0hp MODEL 4 C500011 1 3/16" x 1 3/4" SQUARE KEY 5 C500029 2 1/4" x 3/4" BOLT 6 C100023 1 HUB, TAPERLOCK 7 C100022 1 PULLEY, TAPERLOCK 8 C100008 1 REDUCTION BOX, and KEYS 9 C500174 8 1/2" x 1 3/4" BOLTS 10 C500042 8 3/8" FLAT WASHER 11 C200031 1 PU

1028 Street Road . Southampton, PA 18966 Telephone: 1-800-366-6268 TABLE OF CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Thank You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Se

9. Servicing the sod cutter regularly and correctly. 10. Classen Mfg., Inc. parts and service. 11. Give the customer the operators manual and encourage customer to read it. DATE DELIVERED __________/__________/__________ SIGNATURE _______________________________________ SAFETY ENGINE STARTING PROCEDURES HANDLE FUEL SAFELY -AVOID FIRES Handle gasoline with care; it is highly flammable. Use an approved gasoline container. Fill the fuel tank outdoors. DO NOT fill tank completely full. DO NOT smoke

All transportation charges on parts submitted for repair or replacement under this warranty shall be borne by the purchaser. This warranty does not include engines or engine parts, tires, batteries, or gearboxes that are covered under separate warranties furnished by their manufacturer or supplier, nor does it include normal maintenance parts, including but not limited to, spark plugs, points, filters, blades, and lubricants. All service under this warranty will be furnished or performed by our

Maximum engine rpm is recommended for smooth operation. 8. After cutting a short distance, stop machine by letting the twist grip throttle control go back to its original position. Check thickness of cut and adjust if necessary. 9. At the end of each cutting pass, lift up on the handle bar to clear the cutting blade from the sod. Retard the throttle control and turn machine around into the position for the next cut. 10. When finished cutting sod, reverse steps 6 through 3, leaving the wheel driv