Évaluations - 3, GPA: 4.3 ( )

Fabricant : Delta Taille : 1007.6 kb Nom Fichier : hruh0106.pdf Langue d'enseignement:

120.. - 140.. F* Max. hot water temp 165..F* Hole size in mounting surface 1-1/4” Max. mounting surface depth 1 5/8” Flow rate 2.2 gpm M3 Cartridge with high temperature limit stop 3/8” supply hoses - requires 3/8” compression fitting (not included) Listed by IAPMO Approved for use in Massachusetts *Please know and follow all applicable local plumbing codes when setting the temperature on the water heater. In Massachusetts, the water heater may be set no higher than 112oF. Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber. Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation. The high temperature limit stop may be reset, if desired. English Installation Place the faucet and sealing gasket on the mounting surface. Slide the washer over the bolt. Install the collar. Tighten the collar with a flat head screwd...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :