Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Follow support manufacturer's recommended setting of closet outlet connection. Place felt or neoprene gasket (wax ring not recommended) on closet outlet. When the fixture is installed, closet outlet gasket must be compressed sufficiently to assure a gas and watertight seal. Install bowl on support using cap nuts and fiber washers with the back-up nuts and washers. DO NOT APPLY TOP RIGHT FIBER WASHER AND CAP NUT UNTIL OTHER CAP NUTS HAVE BEEN FIRMLY TIGHTENED USING A WRENCH. Install top right cap nut with fiber washer and run up hand tight. Wrench tighten approximately 1/4 turn. Apply sealant to gap between bowl and finished wall. Remove excess sealant. 5 The following steps require a helper: In the United States: American Standard Brands P.O. Box 6820 Piscataway, New Jersey 08855 Attention: Director of Consumer Affairs For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 442-1902 In Canada: AS Canada ULC 5900 Avebury Ave. Mississauga, Ontario Canada L5R 3M3 Toll Free: (800) 387-0369 In Mexico: Customer Service Manager AS Maquila, S.A. de C.V. Via Morelos #330 Col. Santa Clara Ecatepec 55540 Edo. Mexico 7301115-100 Rev. C - 2 ...
Ce manuel est également adapté pour les modèles :Plomberie - 2633.1 (69.51 kb)
Plomberie - 3353 (69.51 kb)
Plomberie - 2257.001 (69.51 kb)
Plomberie - 2634.001 (69.51 kb)