Évaluations - 4, GPA: 3
(
)
)
|
Facilité d'utilisation
This scalable, flexible switching system delivers high-performance services with field-proven, carrier-grade reliability and availability. The Alcatel-Lucent CBX 3500 Multiservice Edge Switch optimizes core Layer-2 multiservice net works with increased port densities, standards-based interworking, universal I/O modules, and module sharing with the Alcatel-Lucent CBX 500® Multiservice WAN Switch. FEATURES BENEFITS • Industry-leading port densities and low price per port • Multiservice (frame relay, ATM, IP/MPLS, Ethernet) interfaces ranging from channelized DS0 to OC-48c/STM-16c • Universal I/O modules • Fully redundant hardware, control and power components • 1+1 APS or 1:N redundancy protection • Non-service-impacting software upgrades • Module sharing with the Alcatel- Lucent CBX 500 Multiservice WAN Switch • Hot-swappable components • Enables the cost-effective growth of existing services • Allows providers to add new services in an easy and managed manner • Allows stringent SLAs by enforcing and preserving quality of service (QoS) for converged multiservice traffic • Enables the delivery of all services with unprecedented field-proven, carrier-grade reliability and avail ability while dramatically reducing costs • Simplifies network management and reduces operating costs TECHNICAL SPECIFICATIONS Applications • Scaling of profitable ATM, frame relay and private-line services at lower cost • Addition of new revenue- generating Ethernet/IP services using cost-effective multiservice capabilities • Interworking and convergence of multiservice traffic in core Layer-2 multiservice networks Protocol Support ATM • UNI 3.0/3.1/4.0/4.1 • Traffic management 4.1 • IISP • PNNI 1.1, H-PNNI • B-ICI • IMA 1.0/1.1 • Resilient UNI • Fast APS • APS trunk backup • PVC redirect FRAME RELAY • FRF.5/FRF.8 ATM network/service interworking • FRF.16.1 Multilink frame relay • Subrate DS3 • RFC 1490 Translation FRAD • UNI (DTE/DCE) • NNI • Priority frame • SVCs •LMI • FRF.12/.13/.18/.19 ETHERNET/IP/MPLS • BGP-4 • OSPF •RIP • Static • IGMP • RFC 2917 PPP •PoS • MP-iBGP • OSPF-TE • RSVP-TE • LDP • PWE3 encapsulation • 10/100 Mb/s/Gigabit Ethernet • VLAN (2 levels) • Service interworking of Ethernet with frame relay/ATM over MPLS/ATM core • Ethernet-to-ATM interworking (VC/VLAN mapping) • RFC 2684 Ethernet-to-frame relay interworking bridged mode • RFC 2684/IEEE 802.3 Ethernet- like MIB • ATM and Ethernet pseudowires (PWE3) Interface Modules UNIVERSAL I/O (ATM, POS, GIGE) • 24-port DS3 ATM IOA • 1-port OC-48c/STM-16 ATM/PoS IOA • 16-port OC-3c/STM-1 ATM IOA • 2-port GigE (R10) • 4-port OC-12c/STM-4 ATM/PoS IOA ATM I/O • 4-port OC-3/STM-1 ATM* • 8-port DS3 ATM* • 1-port Ch. STM-1/E1 ATM with IMA* • 3-port Ch. DS3/1 ATM with IMA* • 60-port Ch. T1/E1 circuit emulation* FRAME RELAY/IP/ETHERNET I/O • 6-port Ch. DS3/1/0 frame relay with MFR* • 32-port E1 frame relay with MFR* • 8-port DS3 subrate frame relay* • 4-port 10/100 Ethernet* *Module shared with Alcatel-Lucent CBX 500 Multiservice WAN Switch System Architecture • 35 Gb/s full-duplex switching capacity • 16 slots • Distributed routing and signaling • Redundant processors, modules, fans, timing, power • Priority-based circuit routing • Multimode LED-based interfaces Network Synchronization • External/internal Stratum 3 timing • Line timing • Loop timing • Holdover • Free-running Operations, Administration and Maintenance • Internal, external and line loopback • Alarm and trap monitoring • Path trace • F4/F5 OAM cells (loopback) MXOS™ Multiservice Switch Operating Software Carrier-grade, hardened software provides superior switch reliability and network scalability. Network Management • End-to-end Layer-2 provisioning via provisioning manager • Fault correlation via fault manager • Performance data and reports • Billing and SLA management Physical Dimensions • Height: 80.0 cm (31.5 in.) • Width: 48.3 cm (19.0 in.) • Depth: 48.3 cm (19.0 in.) • Weight: under 90.7 kg (200.0 lb) fully configured • Rack-mount options: EIA 48.3 cm (19 in.) or 58.4 cm (23.0 in.) mid-mount, CO style Power • Redundant-chassis power distri bution system • 120 V AC to 240 V AC (requires external converter) • –48 V DC with dual power feeds; max. 60 A • Current: ¬ 20 A max. (120 V AC) ¬ 60 A max. (–48 V DC) • Thermal dissipation: max. 2,880 W Operating Environment • Temperature: 0 C to 50 C (32 F to 122 F) Regulatory Compliance ENVIRONMENTAL/NEBS • GR-63-CORE • GR-1089-CORE SAFETY • UL 1950/CSA 22.2 950 (U.S.A., Canada) • CAS 9590 EMC • FCC Part 15, Class A (U.S.A.) • EN 55022 Class A (Europe) Alcatel, Lucent, Alcatel-Lucent and Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. © 2007 Alcatel-Lucent. All rights reserved. 22060 (06) ...