Log:
Évaluations - 5, GPA: 4 ( )

Instructions Adaptec, Modèle 5ANA-940

Fabricant : Adaptec
Taille : 636.55 kb
Nom Fichier : b1734ac8-f184-4a1c-95b0-e1c64515352e.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


8 If you selected options 1 or 3 in the previous step, go to step 9. If you selected option 2, type the LES ATM address at the ADPT> prompt. A series of messages appears, advising you that the following files will be or have been modified: PROTOCOL.INI CONFIG.SYS 9 If C:\WINDOWS is the name of your Windows directory, press Enter at the ADPT>C:\WINDOWS prompt. If Windows is located in a different place, type the correct drive:\directory name, and press Enter. The installation utility advises you that the system.ini file has been modified. 10 If C:\NWCLIENT is the name of your NetWare Client directory, press Enter at the ADPT>C:\NWCLIENT prompt. If NetWare Client is located in a different place, type the correct drive:\directory name, and press Enter. The installation utility advises you that the startnet.bat file has been modified. 11 At the CONFIGURATION COMPLETE! screen, press Enter. Using Frame Types with Novell NetWare If your Novell network uses a frame type other than the default 802.2, you must edit the PROTOCOL.INI file (usually located in C:\ADPT25LE directory). To support more than one frame type, you must edit the batch file in the Novell NetWare Client directory to properly find the multiple frame types. ATM drivers are NDIS drivers that use an ODI-to-NDIS enabler to work with the Novell NetWare client.You cannot set the frame type in the net.cfg file in the NetWare Client directory. r tttt7 Installing ATM Software for Windows 95 This chapter describes how to install and configure Adaptec ATM software for Windows 95. Automatically Installing Adaptec ATM Software for Windows 95 Your computer should automatically detect and configure your Adaptec LANE adapter. After you install the adapter in your computer, do the following: 1 Start Windows 95. The New Hardware Found dialog box appears. 2 Select Driver from disk provided by hardware manufacturer, and click OK. The Install From Disk dialog box appears. 3 Insert the Adaptec LANE Driver Windows 95 diskette in Drive A, and click OK. A Copying Files… dialog box appears. 4 Insert your Windows 95 CD-ROM in a CD-ROM drive or your Windows 95 diskette in a diskette drive, and click OK. A Copying Files… dialog box appears. 5 Type the following command in the Copy files from text box 7-1 ANA-5910/5930/5940 User’s Guide drive:\win95 where drive: is the location of the CD-ROM/diskette, and click OK. A Copying Files… progress indicator appears followed by the System Settings Change help message box. Click Yes to restart your computer. InstallingATM Software for Windows95 Installing Adaptec ATM Client Drivers for Windows 95 1 Click the Start button, click Settings, and then click Control Panel. 2 Double-click the Network icon. The Network dialog box appears. 3 Click Add. A Select Network Component Type dialog box appears. 4 Select Adapter from the list, and click Add. The Select Network adapters dialog box appears. 5 Click Have Disk. The Install From Disk dialog box appears. 6 Insert the Adaptec ALANE Drivers for Windows 95 diskette in Drive A, and click OK. A Select Network adapters dialog box appears. 7 Select one of the following from the Models list, and then click OK: Adaptec LANE Adapter - ANA 59x0 (ELAN 1 Adaptec LANE Adapter - ANA 59x0A (ELAN 1) The Network dialog box appears again. Note that the Adaptec LANE adapter you selected appears in the list of installed network components. 8 Click OK. A Copying Files… progress indicator appears followed by the Insert Disk critical message box. 9 Insert your Windows 95 CD-ROM in a CD-ROM drive or your Windows 95 diskette in a diskette drive, and click OK. A Copying Files… dialog box appears. ANA-5910/5930/5940 User’s Guide 10 Type the following command in the Copy files from text box drive:\win95 where drive: is the location of the CD-ROM/diskette, and click OK. A Copying Files… progress indicator appears followed by the System Settings Change help message box. 11 Click Yes to restart your computer. Configuring the Adapter To configure the Adaptec LANE adapter 1 Click, Start button, click Settings, and then click Control Panel. 2 Double-click the Network icon. The Network dialog box appears. 3 Click Properties. One of the following dialog boxes appears: Adaptec LANE Adapter - ANA 59x0 (ELAN 1) Properties Adaptec LANE Adapter - ANA 59x0A (ELAN 1) Properties 4 Click the Advanced tab, select a setting from the Property list, and specify values as follows: Pr o p e r t y V a l u e ELAN Name Provide a name if the client’s LECS requires ELAN name registration. If the switch supports this feature, select the text box and type a character string (no spaces); otherwise, select Not Present. ELAN Number The list contains the number automatically assigned to the LAN during installation. The ANA-5910/5930/5940 supports up to four emulated LANs, numbered 0–3. You cannot change this value. LAN Type Select a value from the list. Only Ethernet (802.3) is currently supported. InstallingATM Software for Windows95 Property Value MTU S...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories