Évaluations - 3, GPA: 4.3 ( )

Fabricant : Airlink Taille : 1.53 mb Nom Fichier : 7adb13f3-0e93-42fe-8f5b-afa9ebf38193.pdf Langue d'enseignement:

This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. Designed for the business and home, it saves you the cost of installing a separate modem and ISP line for each computer, while providing ready connection for the users, with or without network cables. Broadband network access is also gaining ground. However, allowing more than two computers to access the Internet at the same time means higher costs. Thus, there is a need to share one legal IP address over a single Internet connection to link each computer with the Internet. The scarcity of IP addresses and using a shared Internet connection through an Internet sharing device can solve high network access costs. All linked computers can make full use of broadband capabilities over such a device. This device not only comes equipped with a wide range of features, but also comes installed and configured right out of the box. This device supports a simple local area network and Internet access sharing, offering great cost savings. The local area network connects home computers while also allowing any of the computers to access the Internet, share resources, or play online games—the basis of the family computing lifestyle. 3 Applications Broadband Internet access: Several computers can share one high-speed broadband connection through wireless or wired connections (WLAN, LAN and WAN-Internet). Resource sharing: Share resources such as printers, scanners and other peripherals. File sharing: Exchange data, messages, and distribute files. Online gaming: Online gaming and e-commerce services can be easily setup through the local area network. Firewall: A built-in firewall function provides security and anti-hacking system. Features O• High speed data transfer rate O• Supports NAT for sharing one IP address to all LAN users O• Supports PPPoE and PPTP protocol for Dial-Up ADSL O• Supports 64/128 bit WEP Encryption O• Supports DHCP Server/Client O• Supports UPnP (Universal Plug and Play) O• Supports virtual server mapping O• Supports packet filtering O• Simple Firewall protection O• Upgradeable firmware for future function O• Simple setting using Quick Setup O• Easy configuration via WEB Browser 4 UNPACKING AND SETUP This chapter provides unpacking and setup information for the Wireless Broadband Router. Unpacking Open the box and carefully unpack it. The box should contain the following items: u• One Wireless Broadband Router u• One External Power Adapter u• One Quick Installation Guide u• One User’s Manual If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the Wireless Broadband Router can be performed properly using the following methods: u• The power outlet should be within 1.82 meters (6 feet) of the Broadband Router. u• Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. u• Make sure there is adequate space around the Broadband Router. Do not place heavy objects on the Broadband Router. u• Fix the direction of the antennas. Try to place the Wireless Router in a position that can best cover your wireless network. Normally, the higher you place the antenna, the better the performance will be. The antenna’s position enhances the receiving sensitivity. 5 HARDWARE INSTALLATION Front Panel The figure below shows the front panel of the Wireless Broadband Router. Wireless Broadband Router Front Panel POWER This indicator lights green when the hub receives power, otherwise it is off. SYSTEM This indicator blinks green when the router is working properly, otherwise it is off. Link/ACT (WAN / LAN) These indicators light green when the LAN/WAN ports are connected to an xDSL/Cable modem successfully. These indicators blink green while the LAN/WAN ports are transmitting or receiving data through the xDSL/Cable modem. Speed (WAN / LAN) These indicators lights green when the ports are connected to 100Mbps Fast Ethernet Network, otherwise they remain off when the ports are connected to 10Mbps Ethernet Network. WLAN (ACT) This indicator lights green when there are wireless devices connecting and transmitting data through the Wireless Router. 6 Rear Panel The figure below shows the rear panel of the Wireless Broadband Router. Wireless Broadband Router Rear Panel Antennas There are two 2dBi Gain Antennas in the rear panel for wireless connection. DC IN Plug the power adapter to this power jack. WAN Port Connect the xDSL/Cable modem to the WAN Port. LAN (1-4) Four RJ-45 10/100Mbps Auto-MDIX ports are available for either 10Mbps or 100Mbps Ethernet connections. RESET Use a pin-shaped item to push the reset button. It will reset the device to factory default settings. This is useful when the administrator forgot the password to login, but the settings will be back to default. 7 Hardware connections Note: Prior to connecting the hardware, make sure to power off your computer, DSL/Cable modem, and the Wireless Broadband Router....

Téléchargez votre

Pour télécharger, entrez 2 chiffres :