Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
TID: TA1248 Total Access 1248 Unacknowledged Alarms: None Static IP Settings - for IP over Ethernet 1. IP address 192.168.1.1 2. Subnet mask 255.255.255.0 3. Default Gateway 192.168.1.254 4. TFTP IP address Not Configured 5. TL1 Port Number(set >1023) 13001 6. TL1 IP Transport type TCP 7. Reset IP Factory Defaults MAC Address 00-a0-c8-12-6d-f9 Selection : '?' - System Help Screen Figure 5-36. Static IP Settings - for IP over Ethernet Menu The Static IP Settings - for IP over Ethernet menu options are shown in Table 5-36. 5-60 61179641L4-5B Menu Descriptions Menu Descriptions Option Description Function 1 IP address This option is used to configure the IP address in decimal dot format (i.e., ###.###.###.###). Subnet mask This option is used to configure the subnet mask in decimal dot format. Default Gateway This option is used to configure the Default Gateway. The Default Gateway is used to forward traffic to a destination outside of the subnet of the Total Access 1248. The Default Gateway is configured in decimal dot format. TFTP IP address This option is used to configure the TFTP IP address. The TFTP IP Address must be configured to use TFTP for software upgrade. The TFTP address is configured in decimal dot format. TL1 Port Number (set >1023) This field is used to configure the Transaction Language 1 Port Number. The default TL1 Port Number is 13001, however, it can be modified to any number greater than 1023. TL1 IP Transport type This option is used to configure the TL1 IP Transport Type. Each time the TL1 IP Transport type option is selected, the setting is toggled between User Datagram Protocol (UDP) and Transmission Control Protocol (TCP). The default is TCP. Reset IP Factory Defaults This option displays the “Restore IP Factory Defaults Menu” on page 5-62. NOTE The Media Access Control (MAC) address is set at the factory. 61179641L4-5B 5-61 Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Main Menu\System Management\Mode Selection and Current IP Settings\Static IP Settings - for IP over Ethernet\Restore IP Factory Defaults\ The Restore IP Factory Defaults menu (see Figure 5-37) is used to reset all IP settings to the factory defaults. CAUTION If Restore IP Factory Defaults is selected remotely, IP connectivity is lost. TID: TA1248 Unacknowledged Alarms: None Total Access 1248 Restore IP Factory Defaults 1. Yes - Service Affecting Selection : MM/DD/YY HH:MM '?' - System Help Screen Figure 5-37. Restore IP Factory Defaults Menu The Restore IP Factory Defaults menu option is shown in Table 5-37. Table 5-37. Restore IP Factory Defaults Menu Option Option Definition Function 1 Yes - Service Affecting This option restores all options to the IP factory default settings. 5-62 61179641L4-5B Menu Descriptions Menu Descriptions Main Menu\System Management\Mode Selection and Current IP Settings\Dynamic IP Settings - for IP over Ethernet\ The Dynamic IP Settings -for IP over Ethernet menu (see Figure 5-38) is used to provision some of the IP settings. When the Mode option is set to Dynamic, the Total Access 1248 system automatically retrieves the IP address, Subnet mask, and Default Gateway from the remote DHCP server. The remaining menu items can be provisioned manually. TID: TA1248 Total Access 1248 Unacknowledged Alarms: None Dynamic IP Settings - for IP over Ethernet IP address 0.0.0.0 Subnet mask 0.0.0.0 Default Gateway Not Configured 4. TFTP IP address Not Configured 5. TL1 Port Number(set >1023) 13001 6. TL1 IP Transport type TCP 7. Reset IP Factory Defaults MAC Address 00-a0-c8-12-6d-f9 Selection : '?' - System Help Screen Figure 5-38. Dynamic IP Settings - for IP over Ethernet Menu The Dynamic IP Settings -for IP over Ethernet menu items are shown in Table 5-38. 61179641L4-5B 5-63 Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice Option Description Function N/A IP address This option cannot be changed. The IP address is automatically retrieved from the DHCP server. N/A N/A 4 5 6 7 Subnet mask Default Gateway TFTP IP address TL1 Port Number (set >1023) TL1 IP Transport type Reset IP Factory Defaults This option cannot be changed. The Subnet mask is automatically retrieved from the DHCP server. This option cannot be changed. The Default Gateway is automatically retrieved from the DHCP server. This option is used to configure the TFTP IP address. The TFTP IP Address must be configured to use TFTP for software upgrade. The TFTP address is configured in decimal dot format. This field is used to configure the Transaction Language 1 Port Number. The default TL1 Port Number is 13001, however, it can be modified to any number greater than 1023. This option is used to configure the TL1 IP Transport Type. Each time the TL1 IP Transport type option is selected, the setting is toggled between User Datagram Protocol (U...