Évaluations - 2, GPA: 4.5 ( )

Fabricant : Agilent Technologies Taille : 4.73 mb Nom Fichier : nasu2.pdf Langue d'enseignement:

This will enable this folder as the shared folder. In the example below “PUBLIC” is Share directory. Same procedure applies for the Music and Video folders. On your Xbox 360, go to “Media” tab, select either Music or Pictures and press A button of the Xbox console to continue. Press X button of the Xbox console to change the source and select your network drive. It should show up as storagexxx and display the folder that you have set up earlier on your NAS adapter. Printer Server Inside the share folder, you can access your picture or music files, depending on which mode you are currently using. Select the files you would like to see or to listen, and start playback. 1. Install printer driver, (for example. if Epson PL-6200L Printer is connected to the NAS adapter, you must install PL-6200L driver into the computer first.) After driver installation, click “Start” • “Setting” • “Printer and Faxes” • “Add a printer”• “Next”. 2. Connect USB printer to NAS adapter. Your network environment should be similar with diagram below: 3. Select “Local printer” and click “Next” to continue. 5. Enter the NAS adapter IP address then click “Next” to continue. 4. Select “Create a new port type of port:” then choose “Standard TCP/IP Port” then click “Next” to continue. 6. Select “Custom” and go to “Setting”. 8. Click “Finish” to complete TCP/IP printer setup. 7. Select “LPR” under protocol, and give a queue name eg:LRxxx; select LPR Byte Counting Enabled then click “OK” to finish the port setting. Note: The NAS adapter printer server does not support GDI/Host-based printers. For some Multi Function Printers (MFP); scanning functions might not be functional probably. Please contact Printer Manufacture for detail Specifications. Bit Torrent server The NAS adapter supports Bit Torrent download without using PC resource. A maximum of 4 bit torrent downloads can be running at the same time. 1. Select “Bit Torrent” and select the “Download Path” you wish to use. Then click “Apply” to save setting. (DO NOT change path setting while performing BT download, otherwise downloading jobs will disappear) 2. Server Port range can be from 6881 to 65535. (6881 is default setting) 3. Type an upload speed limit: 0= unlimited upload speed, and 4 KB is minimum speed. Then click “Set” to save setting. 4. Click “Browse” and select torrent file then click “Upload” The file will show up to the download queue. Note: Jobs listed in the Download Queue will be removed when NAS adapter is turned off or USB storage is removed. Mail Notification After a download is successful, an email will be sent to the designated email address. Click “Mail setup” and input SMTP server, recipient email, SMTP A/C, Password, than click “Apply” to save setting. Mac installations (Mac 10.5.4 or above) 3. Click on the Storage-xxxx (or the correct name of the NAS adapter). Open the Mac browser “Safari” and key-in the host name of the NAS adapter (for example, “Storage-0000”). It will detect the NAS adapter automatically. How to setup SAMBA in Mac OS X 10.5.4 1. Click “Go” on the toolbar, and select ”Network” as the screenshot shown below. 4. Select the folder you wish to share, and click “OK” to share the folder. 5. Click “OK” to show the folder in the Desktop. 2.Double Click “WORKGROUP” (or the correct group name of the NAS adapter), you will find the NAS adapter “STORAGE-xxxx” (or the correct name of the NAS adapter) in following window. How to Map your NAS Adapter to your system. Showing NAS Disk Drive in network 1. Press “Start” button on Windows desktop 2. Press “Search” 3. Select Folders 4. Select Computer or people 5. Select a computer on the network and a new window will appear. 6. Key in the host name, (For example “storage-xxxx”) in the “Computer name” column and then press “Search” button. You will see the following window. 7. Point to the “Storage-xxxx”, double click the mouse. Choose the folder you wish to map, click mouse on its right button and click “Map Network Drive”. Map Network Window appears Note: For faster connection and usability, we recommend that you map a drive. This creates a direct access to the shared drive from My Computer (for more information about drive mapping, refer to your Windows manual). Access SMB folder of NAS Adapter in Ubuntu 8.04 First, using the console get the prerequisites for the samba file system: $ sudo aptitude install samba smbfs $ mkdir /mnt/NAS $ sudo mount.cifs //NAS_adapter_IP_address/Public /mnt/NAS -o username=Guest Search NAS Adapter by SDisk Utility in Ubuntu 8.04 You are going to be installing the JRE and the web browser plug-in. Use the following command from a terminal $ sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts Check that the JRE is properly installed by running the following command from a terminal. $ java -version You should get similar output java version “1.6.0• Java(TM) SE Runtime Environment (build 1.6.0-b105) Java HotSpot(TM) Client VM (build 1.6.0-b105, mixed mode, sharing) Naviga...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :