Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Then, click “Finish”. 4. Pocket USB ADSL modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 5. Pocket USB ADSL modem icon is installed in the Control Panel. 6. Go to the Device Manager, the “Pocket USB ADSL LAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for LAN driver installation. Go to the Device Manager, the “Pocket USB ADSL WAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for WAN driver installation. 1.6.3 For Windows 2000 1. Start Windows. After the opening banner, Windows will show the new device has been detected. Click “Next>”. 39 ENGLISH 2. Select “Search for a suitable driver for my device”. Click “Next>”. Then, insert the installation CD into the CD-ROM drive. In next window, check “Specify a location” and click “Next>”. 40 ENGLISH 3. Click “Browse…”. In the Locate File window, specify the driver directory such as CDRom:\Driver\LAN\ (or CDRom:\DriverEng\LAN) for installing Pocket USB ADSL LAN Adapter or CDRom:\Driver\WAN\ (or CDRom:\DriverEng\WAN) for installing Pocket USB ADSL WAN Adapter. (Please refer Information from ISP section for more details.) Click “Open” and then “Next>“ to continue. 4. When windows titled “Digital Signature Not Found” appear, press “Yes” to continue the installation. 41 ENGLISH 5. Press “Finish”. 6. Pocket USB ADSL modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 7. Pocket USB ADSL modem icon is installed in the Control Panel. 8. Go to the Device Manager, the “Pocket USB ADSL LAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for LAN driver installation. Go to the Device Manager, the “Pocket USB ADSL WAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for WAN driver installation. 42 ENGLISH 1.6.4 For Windows XP 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. Select “Install from a list or specific location” and click “Next >”. 2. Insert the installation CD into the CD-ROM drive and select “Include this location in the search”. Click “Browse” to specify the driver directory such as CDRom:\Driver\LAN (or CDRom:\DriverEng\LAN) for installing Pocket USB ADSL LAN Adapter or CDRom:\Driver\WAN (or CDRom:\DriverEng\WAN) for installing Pocket USB ADSL WAN Adapter. (Please refer Information from ISP section for more details.) Click “OK” and then “Next>” to continue. 43 ENGLISH 44 ENGLISH 3. When windows titled “Hardware Installation” or “Software Installation” appear, press “Continue Anyway” to go on. 45 ENGLISH 4. Then, click “Finish”. 5. Wait a few moments. Windows will show that the new device, Pocket USB ADSL LAN (or WAN) Adapter, has been detected. Select “Install from a list or specific location”. Click “Next >” 6. Click “Next >” when the following figure appears. 7. When windows titled “Hardware Installation” appears, press “Continue Anyway”. 46 ENGLISH 8. Then, click “Finish” to end the installation. 9. Pocket USB ADSL Modem driver is successfully installed and the Status Task Bar will appear in the System Tray. 10. Pocket USB ADSL modem icon is installed in the Control Panel. 11. Go to the Device Manager, the “Pocket USB ADSL LAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers LAN driver installation. Go to the Device Manager, the “Pocket USB ADSL WAN Adapter” is under the Network Adapters, and “Pocket USB ADSL modem” is under the Universal Serial Bus Controllers for WAN driver installation. 47 ENGLISH1.7 Configuration ENGLISH1.7 Configuration Follow the instructions below to configure your Pocket USB ADSL modem. 1. Click Pocket USB ADSL WAN (LAN) Adapter icon in the Control Panel or ADSL Configuration icon on the desktop. The status of ADSL connection will be displayed. 2. Press [Alt]+[P] on keyboard, the following figure appears. 48 ENGLISH 3. Select the Protocol Setup tag, please set the value of “VPI”, “VCI” and “Encapsulation Mode”. Then, click “OK”. For BT (VPI=0, VCI=38), for KC(VPI=1, VCI=50). 49 ENGLISH1.8 LAN DRIVER (RFC1483, RFC1577) ENGLISH1.8 LAN DRIVER (RFC1483, RFC1577) 1.8.1 For Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP > Pocket USB ADSL LAN Adapter. Then, click Properties. 3. Select the IP Address tab. In this page, click the Specify an IP address radio button and enter the “IP address” and “Subnet Mask” provided by your ISP. 50 ENGLISH 4. Select the Gateway tab. Enter the “gateway” provided by your ISP and click Add. 51 ENGLISH 5. In the DNS Configuration page. Click the Enable DNS radio button. Enter the “Host” name and “DNS Server IP address” provided by your ISP....
Ce manuel est également adapté pour les modèles :Matériel de réseau - A01-AU2_MX01 (1.72 mb)