Log:
Évaluations - 1, GPA: 5 ( )

Instructions 3Com, Modèle 1000SW

Fabricant : 3Com
Taille : 3.11 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


3. Make sure the power cord is correctly and securely connected into the HomePortal. 4. Verify that both ends of the power cord are firmly plugged into the brick. Note: If the POWER indicator light is red (signifying a system error), or does not light after performing the steps above, contact 2Wire Customer Care. BROADBAND LINK indicator light is red If the BROADBAND LINK indicator light is red, the HomePortal has not established a connection to your DSL service provider: 1. Go to the HomePortal default page (and click the Info button. Follow the onscreen instructions. 2. Verify that a telephone cord is plugged into the LINE port on the HomePortal and into the telephone wall jack with DSL service. 3. Verify that DSL service is activated by calling your DSL service provider. HOME NETWORK indicator light is not lit If your networked computers are powered on and the HOME NETWORK indicator light is not lit, the HomePortal may not have been connected correctly. Double check the connection diagrams for your particular connection type against your completed HomePortal setup. 21 Appendix A 2Wire Wireless Adapter Installation 2Wire Wireless PC Card The Wireless PC Card is a wireless network card that fits into any standard PC Card Type II slot. A standard Ethernet card requires a cable connection to a hub or a patch panel. Using the Wireless PC Card, you have the same connectivity without the wires. Expanding or redesigning your network is easy, and unlike cabled Ethernet, the Wireless PC Card allows you to roam throughout the network while remaining connected to the LAN. Follow these steps to install the Wireless PC Card: Step 1 -Install the Wireless PC Card. Step 2 -Install the drivers. Step 3 -Reboot your computer so Windows recognizes the adapter. The following sections give you detailed instructions for completing each step. Note: If you are running Windows XP, drivers are located on the HomePortal Setup Wizard for Windows XP CD. Installing the Wireless PC Card To install the Wireless PC Card, turn off your computer and simply insert the card into the PC Card slot. If you have a desktop computer, you need to use an internal wireless adapter in order to insert the Wireless PC Card. 22 Installing Drivers For Windows 98SE 1. Power on your computer. The Add New Hardware Wizard opens. Click Next to continue. 2. When the next window opens, select Search for a better driver for your device (Recommended), and click Next. 3. Insert the HomePortal Setup Wizard CD into your CD-ROM drive, uncheck Floppy disk drives, select the CD-ROM drive checkbox, and click Next. 23 4. Windows locates the best driver for your device. Click Next to continue. 5. After the drivers are copied, click Finish. 6. When the System Setting Change window opens, click Yes to reboot your computer and complete the installation. Installing Drivers For Windows ME 1. Power on your computer and insert the HomePortal Setup Wizard CD into your CDROM drive. 2. When the Add New Hardware Wizard window opens, select Automatic search for a better driver (Recommended), and click Next. 24 3. After the driver files are copied, click Finish. 4. When the System Settings Change window opens, click Yes to reboot your computer and complete the installation. Installing Drivers For Windows 2000 1. Power on your computer and insert the HomePortal Setup Wizard CD into your CDROM drive. 2. When the Found New Hardware Wizard window opens, click Next to continue. 3. The next window prompts you to install device drivers. Select Search for a suitable driver for my device (recommended), and click Next. 25 4. When the Locate Driver Files window opens, uncheck Floppy disk drives, select the CDROM drives checkbox, and click Next. 5. When the Driver Files Search Results window opens, click Next. 6. When the Digital Signature Not Found window opens, click Yes to copy the driver files. 26 7. Click Finish to complete the installation. Installing Drivers For Windows XP 1. Power on your computer and insert the HomePortal Setup Wizard for Windows XP CD into your CD-ROM drive. 2. When the Found New Hardware Wizard window opens, select Install from a list or specific location (Advanced) and click Next to continue. 3. When prompted to choose your search and installation options, ensure that the Search removable media (floppy, CD-ROM) checkbox is selected. 27 4. If the Hardware Installation window opens, click Continue Anyway to copy the driver files. If the Hardware Installation window does not open, continue to step 5. 5. Click Finish to complete the installation. 6. To manually configure the Windows XP wireless client, refer to Appendix B. 28 2Wire Wireless USB Adapter The Wireless USB Adapter is a wireless networking device that is connected to a USB port on your computer using a USB cable. Using the Wireless USB Adapter, you can communicate with one or more computers that are equipped with wireless adapters. Where a standard Ethernet card requires a cable connection to a hub ...

Ce manuel est également adapté pour les modèles :
Matériel de réseau - 1000SW (3.11 mb)
Matériel de réseau - 1000S (3.11 mb)
Matériel de réseau - 1000S (3.11 mb)
Matériel de réseau - 1000S (3.11 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories