Log:
Évaluations - 3, GPA: 4.3 ( )

Instructions 3Com, Modèle 2000 Series

Fabricant : 3Com
Taille : 2.09 mb
Nom Fichier : 5100-000334-000_Gateway_2700_IG_Rev_A.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Gateway Connected Via USB (Macintosh) Note: Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or Macintosh computer can be directly connected to the 2Wire gateway using the USB connection. 1. Install DSL phone filters according to the instructions on page 2. 2. Insert the 2Wire CD in the computer’s CD-ROM drive. 3. Double-click the 2Wire CD icon on your desktop. 4. Double-click 2Wire USB to begin the driver installation. 5. If you have set up an administrator name and password, the Authenticate screen opens. Enter your administrator name and password and click OK. 6. Follow the on-screen instructions. When the driver installation is complete, you will be prompted to restart your computer. 7. After your computer restarts, connect the provided blue USB cable from the USB-PC port on the 2Wire gateway to your computer’s USB port. 8. Open the network Control Panel by selecting the Apple icon > Control Panel > TCP/IP. 9. Verify that “Connect Via: 2Wire USB Remote NDIS…” is selected to set the network adapter as active. 10. Click Save to complete your installation. 11. Proceed to “Configuring the Internet Connection” on page 23. Appendix A: Install the Gateway on Other Operating Systems Configuring the Internet Connection Now that your first computer is connected to the gateway, you need to configure your gateway to communicate with your Internet service provider. To activate your Internet account: 1. Open your Internet browser. 2. Type into the browser’s address line. 3. When prompted to enter a key code, enter the key code provided by your Internet service in the key code field, and click NEXT. 4. Select your Local Time Zone and click NEXT. 5. You may be prompted to enter service provider information such as username and password. Enter any required service provider information and click NEXT. 6. The connection process will begin. During this process the INTERNET light on the front of the gateway will first blink green then turn solid green. This step could take up to five minutes as the gateway searches for your broadband service. 7. The gateway will now connect to the Internet. This process may take several minutes. If the registration screen opens, click the REGISTER button and complete the 2Wire registration process. Regulatory Information Declaration of Conformity Trade Name: 2Wire Responsible Party: 2Wire, Inc. Address: 1704 Automation Parkway San Jose, CA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Only peripherals (computer input/output devices, terminals, printers, and so forth) that comply with FCC Class B limits may be attached to this computer product. Operation with noncompliant peripherals is likely to result in interference to radio and television reception. All cables used to connect peripherals must be shielded and grounded. Operation with cables, connected to peripherals that are not shielded and grounded may result in interference to radio and television reception. WARNING: While this device is in operation, a separation distance of at least 20 cm (8 inches) must be maintained between the radiating antenna inside the ERU and the bodies of all persons exposed to the transmitter in order to meet the FCC RF exposure guidelines. Making changes to the antenna or the device is not permitted. Doing so may result in the installed system exceeding RF exposure requirements. This device must not be co-located or operated in conjunction with any other antenna or radio transmitter. Installers and end users m...

Ce manuel est également adapté pour les modèles :
Matériel de réseau - 2000 Series (2.09 mb)
Matériel de réseau - 2000 Series (2.09 mb)
Matériel de réseau - 2000 Series (2.09 mb)
Matériel de réseau - 2000 Series (2.09 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories