Log:
Évaluations - 3, GPA: 4.7 ( )

Instructions AmbiCom, Modèle WL250-KIT

Fabricant : AmbiCom
Taille : 826.25 kb
Nom Fichier : 04fc6535-74e2-4a7c-9862-1679181c2c92.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


. 1 2 3 If the current and new passwords are correctly entered, after you click ‘Apply’, you’ll be prompted to input your new password again to login: Please use new password to enter web management interface again, and you should be able to login with new password. 2-4-3 Remote Management This router does not allow management access from Internet, to prevent possible security risks (especially when you defined a weak password, or didn’t change default password). However, you can still management this router from a specific IP address by enabling the ‘Remote Management’ Function. Please click ‘System’ menu on the left of web management interface, then click ‘Remote Management’, and the following message will be displayed on your web browser: Host Address (1): Input the IP address of the remote host you wish to initiate a management access. Port (2): You can define the port number this router should expect an incoming request. If you’re providing a web service (default port number is 80), you should try to use other port number. You can use the default port setting ‘8080’, or something like ‘32245’ or ‘1429’. (Any integer between 1 and 65534) Enabled (3): Select the field to start the configuration. 1 2 3 When you finish with all settings, click ‘Apply’, and you’ll see the following message displayed on web browser: Press ‘Continue’ to save the settings made and back to web management interface; press ‘Apply’ to save the settings made and restart the router so the settings will take effect after it reboots. NOTE: When you want to manage this router from another computer on Internet, you have to input the IP address and port number of this router. If your Internet service provider assigns you with a static IP address, it will not be a problem; but if the IP address your service provider assigns to you will vary every time you establish an Internet connection, this will be a problem. Please either asks your service provider to give you a static IP address, or use dynamic IP to host name mapping services like DDNS. Please refer to chapter 2-5-8 ‘DDNS client’ for details. NOTE: Default port number the web browser will use is ‘80’. If the ‘Port’ setting in this page is not ‘80’, you have to assign the port number in the address bar of web browser manually. For example, if the IP address of this router is 1.2.3.4, and the port number you set is 8888, you have to input following address in the address bar of web browser: 2-5 Setup Internet Connection (WAN Setup) Internet connections setup can be done by using ‘Quick Setup’ menu described in chapter 2-3. However, you can setup WAN connections up by using WAN configuration menu. You can also set advanced functions like DDNS (Dynamic DNS) here. Please click ‘WAN’ menu on the left of web management interface, and the following message will be displayed on your web browser: Please select an Internet connection method depend on the type of connection you’re using. You can either click the connection method on the left (1) or right (2). If you select the connection method on the right, please click ‘More Configuration’ button after a method is selected. Dynamic IP - Please go to section 2-5-1 Static IP - Please go to section 2-5-2 PPPoE - Please go to section 2-5-3 PPTP - Please go to section 2-5-4 L2TP - Please go to section 2-5-5 Telstra Big Pond - Please go to section 2-5-6 DNS - Please go to section 2-5-7 DDNS - Please go to section 2-5-8 1 2 2-5-1 Setup Procedures For ‘Dynamic IP’: Host Name (1): Please input the host name of your computer, this is optional, and only required if your service provider asks you to do so. MAC address (2): If your service provider only permits computer with certain MAC address to access internet, please input MAC address of your computer here. If you’re using the computer which used to connect to Internet via cable modem, you can simply press ‘Clone Mac address’ button to fill the MAC address field with the MAC address of your computer. After you finish with all settings, please click ‘Apply’, the following message will be displayed on your web browser: Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). 1 2 2-5-2 Setup Procedures For ‘Static IP’: IP address assigned by your Service Provider (1): Please input IP address assigned service provider Subnet Mask (2): Please input subnet mask assigned by your service provider Service Provider Gateway Address (3): Please input the IP address of DNS server provided by your service provider. After you finish with all settings, please click ‘Apply’, the following message will be displayed on your web browser: Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is reb...

Ce manuel est également adapté pour les modèles :
Matériel de réseau - WL250-KIT (826.25 kb)
Matériel de réseau - WL250N-AR (826.25 kb)
Matériel de réseau - WL250N-AR (826.25 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories