Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
After making your selection, press the “X” key to return to the previous screen. LCD Controls When the LCD Controls option is selected, the LCD Controls screen displays with the following menu items: Contrast, On Brightness, Off Brightness. A. Choose one of the menu selections and press the checkmark key to go to that screen: Contrast - In the Contrast screen, use the left / right arrow keys to decrease / increase the text and screen contrast. On Brightness - In the On Brightness screen, use the left / right arrow keys to decrease / increase the brightness of a screen with a feature that is enabled. Off Brightness - In the Off Brightness screen, use the left / right arrow keys to decrease / increase the brightness of a screen with a feature that is disabled. B. After making your selection, press the “X” key to return to the previous screen. Step 2: Change User Name and Password, Set Self- Monitoring Now that the ER is physically installed on your network and you have configured its network settings, you should be able to access the Administrator console. Access the Internet A. Restore the setup workstation you used for the Network Setup to its original settings, and connect it to the network hub to create an “administrator workstation.” (You could also use another workstation already on the network that you want to designate as the administrator workstation.) B. Launch IE on the administrator workstation. C. In the address field, enter the LAN 1 IP address you assigned to the ER (Step 1A: Quick Start menu: administration menu; Step 1B: Network Setup: Network Settings, item “C”; or Step 1C: IP / LAN1). Be sure to include the port information :88 in the address field. For example, if the ER were assigned an IP address of 10.10.10.10, you would enter in the browser’s address field. D. Click Go. You should be prompted to log into the Administrator console, giving the User Name (admin) and Password (reporter): If you can access the main screen of the Administrator console, the ER setup is going as planned and you should proceed to changing your User Name and Password. If you cannot access the main screen, verify the following: The ER is powered on. Can the administrator workstation normally connect to the Internet? Is the administrator workstation able to ping the ER? Did you restart the ER after changing the network settings? If still unsuccessful, contact an 8e6 Technologies solutions engineer or technical support representative. Change User Name and Password A. Set up a new administrator user name and password by clicking on the Network pull- down menu and choosing Administrators to display the Add/Edit/Delete Administrators screen: B. Select New Administrators from the pull-down menu. C. Enter a User Name and Password. D. In the Confirm Password field, re-enter the password. E. Click Save. Set Self-Monitoring A. From the Server pull-down menu, choose Self-Monitoring to display the Self Monitoring screen: B. Choose YES to activate monitoring. C. Enter the Master Administrator’s E-Mail Address. D. Click Choice one and enter an e-mail address of an individual in your organization that you would like notified if the ER detects any problems when processing data. This can be the same e-mail address entered in the previous field. Enter up to four e-mail addresses. E. Click Save. Step 3: R3000 Configuration If you are using 8e6’s R3000 for your Web-access logging device, this step can be performed any time during ER setup, but must be completed in order for the ER to receive logs from the R3000. A. Access the Administrator console of the R3000. B. Choose the Reporting button at the top of the screen to display the Reporting section of the Administrator console. C. From the navigation panel at the left of the screen, choose Report Configuration to display the Report Configuration window. D. Select 8e6 Enterprise Reporter, and then click Save. E. On the 8e6 Enterprise Reporter tab, in the Server field, enter the LAN 1 IP address you assigned to your ER (Step 1A: Quick Start menu: administration menu; Step 1B, Network Setup: Network Settings, item “C”; or Step 1C, IP / LAN1). F. Click Add to include this IP address in the Remote Server list box. Your R3000 is now set to FTP its log files to your ER. NOTE: It is recommended you wait for 1 - 2 hours after the initial installation so sufficient data is available for viewing. You can see if log files have transferred by accessing the ER’s Administrator console and choosing Tools from the Database pull-down menu to display the Tools screen. Choose the File Watch Log and click View. The transfer is working if you see an entry that includes the date, time, and IMPORTING: shadow.log.machine1. The transfer should occur every hour. Once you see an entry, reporting information will be available one hour after the timestamp of the import listing. Step 4: Client Workstation Configuration Once your ER is installed, you need to be sure the workstation that will ...
Ce manuel est également adapté pour les modèles :Matériel de réseau - Enterprise Reporter HL-002-002 (3.17 mb)
Matériel de réseau - Enterprise Reporter HL-002-002 (3.17 mb)
Matériel de réseau - Enterprise Reporter HL-002-002 (3.17 mb)
Matériel de réseau - Enterprise Reporter HL-022-002 (3.17 mb)