Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Make sure to insert the yellow plug into the yellow video input and the white and red audio plugs into the left (L) and right (R) audio inputs. 6 Connect the AC power adapter (8) to a mains socket and to the DC 9V —<± supply socket (4) of the transmitter unit. LM1100 TVLINK TRANSMITTER AUDIO INPUT TV INPUT AUDIO INPUT TV INPUT 1 2 3 4 AV SOURCE INPUT R–AUDIO–L IR CHANNEL VIDEO DC 9V ON/OFF AUDIO INPUT TV INPUT 1 2 3 4 AV SOURCE INPUT R–AUDIO–L IR CHANNEL VIDEO DC 9V ON/OFF AUDIO INPUT TV INPUT OURCE INPUT UDIO–L VIDEO DC 9V ON/OFF 8 ENGLISH SBC_LM1000.qxd 18-02-2004 15:34 Pagina 8 Connecting the receiver unit to the TV 1 Position the receiver unit close to the TV. 2 Connect the RCA to SCART adapter (20) supplied to the SCART connector of the TV. 3 Connect the video cable (19) and audio cable (18) supplied to both the adapter and the TV OUTPUT connectors (15) of the receiver. Make sure to insert the yellow plugs into the yellow video in- and outputs and the red and white plugs into the red and white audio in- and outputs. 4 Connect the AC power adapter (17) to a mains socket and to the DC 9V —<± supply socket (14) of the receiver unit. Note: In case your TV is equipped with RCA connectors you can directly connect the TV OUTPUT connectors (13) of the receiver to the corresponding RCA connectors of the TV. Make sure to insert the yellow, white and red plugs into the yellow, white and red inputs on both receiver and TV. Channel selection • Set the CHANNEL switches (6 and 16) on both units to channel 1. • If interference occurs (e.g. degraded image) set both switches to another channel. > Both units are now ready for use. Note: Both units must always be set to the same channel. Optional connection to audio equipment 1 Connect one end of the video cable (19) supplied to the video input (yellow) of the SCART adapter (or directly to the yellow video input of the TV) and the other end to the VIDEO output (15) of the receiver. 2 Connect the audio cable (18) supplied to the AUX input of the audio equipment and the R-AUDIO-L outputs (15) of the receiver. Make sure to insert the white and red plugs into the left (L) and right (R) inputs. Read the Instructions For Use of the audio equipment for the correct input. R L TV 1 2 3 4 TV OUTPUT R–AUDIO–L CHANNEL VIDEO DC 9V ON/OFF TPUT VIDEO DC 9V ON/OFF 1 2 3 4 TV OUTPUT R–AUDIO–L CHANNEL VIDEO 1 2 3 4 AV SOURCE INPUT R–AUDIO–L IR CHANNEL VIDEO R L TV 1 2 3 4 TV OUTPUT R–AUDIO–L CHANNEL VIDEO DC 9V ON/OFF ENGLISH 9 SBC_LM1000.qxd 18-02-2004 15:34 Pagina 9 10 ENGLISH 4. Operation TPUT VIDEO DC 9V ON/OFF TV OUTPUTR–AUDIO–LVIDEODC 9VON/OFFTV OUTPUT R–AUDIO–L VIDEO DC 9V ON/OFF AV SOURCE INPUTR–AUDIO–LVIDEODC 9VON/OFFAV SOURCE INPUT R–AUDIO–L VIDEO DC 9V ON/OFF 3 Connect the AC power adapter (17) to a mains socket and to the DC 9V —<± supply socket (14) of the receiver unit. > Audio information from the PC will now be heard via the audio equipment. 4 Play an audio file on the PC to check if the audio signal is available on the audio output. 1 Turn on the PC and select an audio or video file you want to play. 2 Start playback of the selected file. Refer to the Instructions For Use of your Windows operating system on how to select and play audio/video files. 3 Make sure you see the movie playing on your PC monitor or hear the music on the PC speakers, if connected. 4 Activate the TV-Out function of your PC video card and make sure you have video signal available on the TV-Out output. Refer to the Instructions For Use of your video card for details. 5 Turn on the TV. 6 Select the external input (EXT or AV) on your TV. Read the Instructions For Use of your TV. 7 Set the ON/OFF switch on both transmitter (3) and receiver (13) to ON. > You can now watch the video source on your TV. Notes: – The Wireless PC-TV Link does NOT give you control over PC and/or audio/video content you are playing.You need to manually start/stop playing videos or audio songs on your PC via the connected mouse or keyboard. – You should see the video you are playing on the PC on the TV screen, if not please check if you performed all steps correctly and make sure you have a video signal on the TV-out of your PC. If you have a TV-signal on the TV-out of your PC but no reception on the Reciever, refer to the troubleshooting section of this manual. ENGLISH 11 5. Problem solving If a fault occurs, first check the points listed below. If you are unable to remedy a problem by following these hints, contact the helpline (see ‘Need help?’) or consult your dealer. Never tr y to open the set yourself as this will void the guarantee. First, check all cables to ensure that they are connected correctly. Problem Solution No picture on TV •Turn on the PC and star t playing a video file. Make sure the TV-Out output of the video card is activated and a video signal is present. Refer to the Instructions For Use of the video card on how to activate the TV-Out output of the video card. • In case you have a por table TV you can check...
Ce manuel est également adapté pour les modèles :Matériel de réseau - SBCLM1000/00 (2.99 mb)