If executed without the client-id argument, the command displays information about all the ACSEI clients in order of registration time. Examples # Display information about ACSEI client 1. display acsei client info 1 Total Client Number: 1 Client ID: 1 Client Description: Hardware: System Software: Application Software: CPU: Intel(R) Pentium(R) M processor 1.40GHz PCB Version: 3.00 CPLD Version: 1.00 Bootrom Version: 1.12 CF card: 256 MB Memory: 512 MB Harddisk: 40.0 GB # Display information about all ACSEI clients. display acsei client info Total Client Number: 2 Client ID: 1 Client Description: Hardware: System Software: Application Software: CPU: Intel(R) Pentium(R) M processor 1.40GHz PCB Version: 3.00 CPLD Version: 1.00 Bootrom Version: 1.12 CF card: 256 MB Memory: 512 MB 39 Harddisk: 40.0 GB Client ID: 2 Client Description: Hardware: System Software: Application Software: CPU: Intel(R) Pentium(R) M processor 1.40GHz PCB Version: 3.00 CPLD Version: 1.00 Bootrom Version: 1.12 CF card: 256 MB Memory: 512 MB Harddisk: 40.0 GB Table 6 Output description Field Description Client ID ID of the ACSEI client Client Description ACSEI client description Hardware Hardware version of the ACSEI client System Software System software name and version of the ACSEI client Application Software Application name and version of the ACSEI client CPU CPU information of the ACSEI client PCB Version PCB version of the ACSEI client CPLD Version CPLD version of the ACSEI client Bootrom Version Boot ROM version of the ACSEI client CF card CF card information of the ACSEI client Memory Memory information of the ACSEI client Harddisk Harddisk information of the ACSEI client display acsei client summary Syntax display acsei client summary [ client-id ] View Any view Default level 1: Monitor level Parameters client-id: ID of an ACSEI client whose summary is to be displayed, which ranges from 1 to 12. 40 Description Use the display acsei client summary command to display ACSEI client summary information. Summary information of multiple ACSEI clients is displayed in order of registration time. If executed without the client-id argument, the command displays summary information about all the ACSEI clients. Examples # Display the summary of ACSEI client 1. display acsei client summary 1 Total Client Number: 1 Client ID: 1 Status: Open MAC Address: 00e0-fc0a-c3ef Interface: GigabitEthernet6/1/1 Last registered: 02/08/2007 12:00:00 # Display the summary of all ACSEI clients. display acsei client summary Total Client Number: 2 Client ID: 1 Status: Open MAC Address: 00e0-fc0a-c3ef Interface: GigabitEthernet6/1/1 Last registered: 02/08/2007 12:00:00 Client ID: 2 Status: Open MAC Address: 00e0-fa1e-03da Interface: GigabitEthernet6/0 Last registered: 02/08/2007 13:00:00 Table 7 Output description Field Description Client ID ID of the ACSEI client Status ACSEI client status MAC Address MAC address of the ACSEI client Interface Interface carrying the ACSEI client Last registered The last registration time of the ACSEI client 41 ACSEI client configuration commands acsei-client enable Syntax acsei-client enable undo acsei-client enable View Interface view Default level 2: System level Parameters None Description Use the acsei-client enable command to enable ACSEI client. Use the undo acsei-client enable command to disable ACSEI client. By default, ACSEI client is disabled. A system can run only one ACSEI client, that is, ACSEI client can be enabled on only one interface at a time. However, ACSEI client on the Comware platform and that on the OAP module can run simultaneously. Examples # Enable ACSEI client on interface GigabitEthernet 0/1 system-view [Sysname] interface gigabitethernet 0/1 [Sysname-GigabitEthernet0/1] acsei-client enable display acsei-client information Syntax display acsei-client information View Any view Default level 1: Monitor level Parameters None Description Use the display acsei-client information command to display information about ACSEI client. 42 Examples # Display information about the current ACSEI client. display acsei-client information Client Description: Firewall Hardware: A.0 System Software: COMWAREV500R002B70D013 Application Software: V300R001B01D247SP02 CPU: RMI XLR732 1000MHz PCB Version: A.0 CPLD Version: 1.0 Bootrom Version: Basic BootRom Version:1.02,Extend BootRom Version:1.01 CF card: 247M Bytes Compact Flash Storage Device Memory: 2048M Bytes DDR2 SDRAM Memory Harddisk: display acsei-client status Syntax display acsei-client status View Any view Default level 1: Monitor level Parameters None Description Use the display acsei-client status command to display the current state of ACSEI client. Examples # Display the current state of ACSEI client. display acsei-client status Client ID: 1 Status: Regsent Slot Number: 1 Client-side Interface: GigabitEthernet 0/1 Server-side interface: Unknown Table 8 Output description Field Description ACS...
