Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Matériel de réseau - AirCard 598U (Telus) (820.69 kb)
Matériel de réseau - AirCard 598U (Telus) (296.8 kb)
Facilité d'utilisation
.Your package contains the following: .• USB 598 modem . • This Quick Start Guide . • USB extension cable • Laptop clip Note: To install the drivers and software, you do not need an installation CD. Your modem uses the Sierra Wireless TRU-Install™ feature—the drivers and software are installed when you insert the modem into your computer. As part of the activation process you may need your billing information and a telephone to contact your service provider. Write down the ESN or MEID (shown on the back label of the USB 598 modem; you may need to provide this value to your service provider, during the activation process): ESN/MEID: ___________________________________ Installing the software and drivers Your computer must be running Mac OS X version 10.4.11 or newer. (To check your version of Mac OS X, from the Apple menu ( ) choose About This Mac.) If your Mac OS X version is earlier than 10.4.11, then you must upgrade to version English 10.4.11 or newer. Use the Software Update feature (in System Preferences), or contact an Apple reseller or an Apple retail store, or visit If you’ll be using GPS, your computer must be running the Safari web browser version 3.1.1 or newer (available at If your computer has an AirPort®, AirPort Extreme®, AirPort Express®, or Bluetooth 1 adapter, turn it off. (For instructions, see the user guide of your computer). Insert the modem into your computer’s USB slot. 2 Note: If your computer’s USB slot is vertical, use the supplied USB extension cable and laptop clip. Do not insert the modem or the USB extension cable into a USB hub or, if your keyboard is separate from your laptop, a USB slot on your keyboard. In the window that appears, double-click Watcher Installer.mpkg. 3 In the “Welcome to the Sierra Wireless Watcher Installer” window, click Continue. 4 Read and accept the Software License Agreement. 5 If the “Select a Destination” window is displayed, select a destination volume to install 6 the software, and click Continue. 7 In the “Standard Install on ...” window, click Install. If a window appears, prompting you to enter your password, enter your Mac password, 8 and then click OK. In the window with the message that you will have to restart your computer, click 9 Continue Installation. In the “Installation completed successfully” window, click Restart. 10 After your computer restarts, run Watcher: in Finder™, choose Go > Applications > 11 Sierra Wireless Watcher, and then double-click Watcher. Watcher should start. If the New Port Detected window appears, click Continue. 12 If a window appears, prompting you to enter your password, enter your Mac password, 13 and then click OK. Watcher displays a status message or an “Alert” window. Use the following table to 14 determine your next actions. Text/window displayed Description/next action “Device is Your device is preactivated. Unlock the device: Locked” 1. From the Extras item on the Watcher menu, choose Unlock ... Device. 2. In the Watcher window, enter the lock code (PIN), and click OK. If you can’t recall your lock code, try using the last four digits of your device’s phone number (“About Watcher”) or try 0000. If none of these work, contact your service provider. Once your device is unlocked, you are ready to connect to the network; see “Connecting to the network” on page 7. “Alert” window Your device is not activated. (“Watcher is 1. Wait until the process is completed. attempting to activate the modem...”) If activation is successful, Watcher displays only the name of the carrier, after which you are ready to connect to the network; see “Connecting to the network” on page 7. 2. If Watcher displays “Not activated”, use the Activation Assistant (see the next page). “Alert” window Your device is not activated. (“This device is 1. In the Alert window, click Yes. not activated...”) If an Alert window (“Watcher is attempting to activate the modem...”) is displayed, see the above row. 2. If the Activation Assistant window is displayed, continue from step 2 in the “Activation Assistant” section (see the next page). “Not activated” / Name of carrier Your device is not activated. Use the Activation Assistant (see the next page). Only the name of carrier Your device is preactivated. You are ready to connect to the network; see “Connecting to the network” on page 7. EnglishEnglish Activation Assistant If your device is not activated, use the Activation Assistant: From the Extras item on the Watcher menu, choose Activation. 1 The Activation Assistant window is displayed. Phone your service provider. Inform them that you are activating a Sierra Wireless 2 wireless device. Follow the instructions of your service provider to activate your device. Write down this 3 information that your service provider gives you (depending on your service provider, some of the following items may not apply): Activation code (MSL): _________________________________________________ USB 598 phone nu...