Évaluations - 1, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Matériel de réseau - R6300v2 (3.24 mb)
Matériel de réseau - R6300v2 (3.03 mb)
Facilité d'utilisation
If no LEDs are lit, press the Power On/Off button on the rear panel of the router. You can use an Ethernet cable or connect wirelessly. • For a wired connection, use an Ethernet cable (not included) to connect your computer to a black Ethernet LAN port on your router. • To connect wirelessly, use the preset wireless security settings on the label on the bottom of the router. The first time that you connect to the router, the genie screen displays. Follow the genie steps to connect to the Internet. If NETGEAR genie Does Not Display • Close and reopen the browser. Type in the address bar, and type the user name admin and the default password (password). • Make sure that the computer is connected to one of the four LAN Ethernet ports, or wirelessly to the router. • Make sure that the router has full power, and that its WiFi LED is solid blue. • If the computer is set to a static or fixed IP address (this condition is uncommon), change it to obtain an IP address automatically from the router. Preset Wireless Security This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device, like a serial number, to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset WiFi SSID or password. If you do change the settings, the SSID and password on the label no longer apply. Wireless Network Settings Record the preset wireless settings on the label in the space below for easy reference. WiFi network name (SSID): Network key (password): If you change the default settings, record them here for easy reference and store this booklet in a safe place: WiFi network name (SSID): Network key (password): 1. Type in a web browser. 2. Log in using the user name (admin) and the default password (password). 3. Select Wireless Settings. Join the Wireless Network You can use either the Wi-Fi Protected Setup (WPS) method or the manual method to join your wireless network. 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on your wireless computer or device, or follow the WPS instructions that came with your wireless device to complete the WPS process. Note: Some older wireless computers or devices cannot use WPS. 1. On your computer or wireless device, open the software that manages its wireless connections. This software scans for all wireless networks in your area. 2. Look for the WiFi network name (SSID) and select it. The SSID is on the label on the bottom of the router. 3. If you changed the name of your network during the setup process, look for that network name. 4. Enter the preset password (or your custom password if you changed it). 5. Click Connect. Access the Router to Make More Changes After you use NETGEAR genie to set up the router, you can log in to the router to view or change its settings. 1. Launch a web browser from a computer or wireless device that is connected to the router. 2. Type or in the address field of the browser. A login screen displays. 3. Enter admin for the user name and password for the password. The Basic Home screen displays. 1. Log in to the router. 2. On the ADVANCED tab, select Administration > Set Password. 3. Type your old password, and type the new password twice. 4. Select the Enable Password Recovery check box. 5. Click Apply. 6. When prompted, answer questions. The answers are saved. To use this feature, you must have enabled password recovery. 1. Launch a web browser from a computer or wireless device that is connected to the router. 2. Type or in the address field of the browser. 3. When the login screen displays, click Cancel. You are prompted to enter your saved answers so that you can log in to the router. ReadySHARE Access You can connect a USB storage device or printer to the USB port on the router and share it on the network. • Select Start > Run and enter \\readyshare in the dialog box. Click OK. • Open a browser and enter \\readyshare in the address bar. • Open My Network Places and enter \\readyshare in the address bar. 1. Select Go > Connect to Server. 2. Enter smb://readyshare as the server address. 3. Click Connect. ReadySHARE Printer 1. Connect the USB printer to the router USB port with a USB printer cable. 2. Install the printer driver software (available from the printer manufacturer) onto each computer that will share the printer. 3. Visit and download and install the NETGEAR USB Control Center utility onto each computer that will share the printer. 4. For ReadySHARE Printer setup, follow the Easy to Set-up Instructions that are available online just above the download links. Download the free genie app from Automatically fix common network problems and easily manage your home netwo...