Log:
Évaluations - 0, GPA: 0 ( )

Instructions NETGEAR, Modèle R6250

Fabricant : NETGEAR
Taille : 430.24 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


If any items are incorrect, missing, or damaged, contact your NETGEAR dealer. Ethernet cableR6250 WiFi Router Power adapter In some regions, a resource CD is included in the package. 1. Prepare your modem. 2. Connect your modem. Unplug your modem. If it has a battery backup, remove the battery. Plug in your modem. Put the battery back in. Then cable the modem to the router Internet port. ModemInternetRouterDSL or Cable4. Connect a computer.3. Power on the router. 5. Launch a browser. Wait for the WiFi LED to light.You can use an Ethernet cable or . connect wirelessly. If you do not see genie, type Type admin for the user name and password as the password. NETGEAR genie displays. Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit NETGEAR recommends that you use only the official NETGEAR support resources. Contents Install Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 If NETGEAR genie Does Not Display. . . . . . . . . . . . . . . . . 6 Preset Wireless Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wireless Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . 7 Join the Wireless Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Access the Router to Make More Changes. . . . . . . . . . . . . . . . 9 ReadySHARE Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ReadySHARE Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 NETGEAR genie App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Make sure that your Internet service is active before you install the router. a.Unplug your modem’s power. b. If the modem has a battery backup, remove its batteries. c. If your modem was already connected to another router, disconnect the cable between your modem and that router. Your modem should be turned off, and cabled only to the wall jack for your Internet service. a.Plug in, then turn on your modem. (Replace the batteries if you removed them previously.) b. With the yellow Ethernet cable that came with the router, connect your modem to the Internet port of your router. a.Connect the power adapter to the router, and plug the power adapter into an outlet. b. Wait for the WiFi LED on the front panel to light. If no LEDs are lit, press the Power On/Off button on the rear panel of the router. You can use an Ethernet cable or connect wirelessly. • For a wired connection, use an Ethernet cable (not included) to connect your computer to a black Ethernet LAN port on your router. • To connect wirelessly, use the preset wireless security settings on the label on the bottom of the router. The first time that you connect to the router, the genie screen displays. Follow the genie steps to connect to the Internet. If the genie screen does not display, close and reopen the browser. Type www://routerlogin.net in the address bar, type the user name admin and the default password (password). If NETGEAR genie Does Not Display • Make sure that the computer is connected to one of the four LAN Ethernet ports, or wirelessly to the router. • Make sure that the router has full power, and that its WiFi LED is solid blue. • To make sure that the browser does not cache the previous page, close and reopen the browser. Then type www://routerlogin.net. •If the computer is set to a static or fixed IP address (this condition is uncommon), change it to obtain an IP address automatically from the router. Preset Wireless Security This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device, like a serial number, to protect and maximize your wireless security. This information is on the label on the bottom of the product. NETGEAR recommends that you do not change the preset WiFi SSID or password. If you do change the settings, the SSID and password on the label no longer apply. Wireless Network Settings Record the preset wireless settings on the label in the space below for easy reference. WiFi network name (SSID): Network key (password): If you change the default settings, record them here for easy reference and store this booklet in a safe place: WiFi network name (SSID): Network key (password): 1. Type in a web browser. 2. Log in using the user name (admin) and the default password (password). 3. Select Wireless Settings. Join the Wireless Network You can use either the Wi-Fi Protected Setup (WPS) method or the manual method to join your wireless network. 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS bu...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories