Log:
Évaluations - 0, GPA: 0 ( )

Instructions HP, Modèle HP General IO Connectivity

Fabricant : HP
Taille : 208.82 kb
Nom Fichier :
Langue d'enseignement: ennn
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


HP PCI 64-Port Serial Multiplexer Adapter Installation
Installing AD279A PCI MUX 64-Port Software
3. Click the Receive for free >> option provided against MUX (PCI 8/64 port adapters), Driver
Software heading.
4. Fill out the free product registration form and click next.
5. Search for Download Software option, and click the depot for HP-UX 11i v3 operating system
version to download the driver, utilities, and manpage for the AD279A adapter.
6. In the Documents column next to the Download Software column, click Installation
Instructions to download instructions for using the Software Distributor tool to install the
driver, utilities, and manpage for the AD279A adapter.
Step 3. Run the swinstall program using the following command at the command prompt:
$ /usr/sbin/swinstall
The Software Selection window is displayed.
Step 4. Change the Source Host Name, if necessary, and then enter the mount point of the drive in the
Source Depot Path field. Select OK to return to the Software Selection window.
The Software Selection window contains a list of available software to install.
Step 5. Based on the operating system that is installed, select the PCI MUX software.
For HP-UX 11i v3 operating system, select the following software:
PCIMUX-00 -> B.x.xxxx PCI MUX; Supptd HW=AD278A/AD279A
Where:
x - represents the release number, for example, 11.31.
xxxx - represents the AR release number or the version number for a Web release or OS initial
release.
The AR release number can be 0609, 0612, and so on.
The version number for a Web release or OS initial release can be 01, 02, and so on.
Step 6. Select Mark for Install from the Actions menu. This selects the highlighted software.
Step 7. From the Actions menu, select the Install... menu and then select Install. The product installation
begins and the Install Analysis window is displayed.
Step 8. Select OK in the Install Analysis window when the Status field displays Ready.
Step 9. Select YES in the Confirmation window to start software installation. The swinstall command
loads the fileset, runs the control script for the filesets, and builds the kernel.
Step 10. When the processing is completed, the Status field displays a Ready message. Select Done. The
Note window is displayed.
Step 11. Select OK in the Note window to reboot. The user interface disappears and the system reboots.
After the system restarts, log on to the system as superuser and view the
/var/adm/sw/swagent.log and /var/adm/sw/swinstall.log files for error or warning messages.
Step 12. Run the following command at the command prompt to verify whether all installed PCI adapters
have a software state of CLAIMED:
$ ioscan -knfC tty
8
Chapter 1


...

Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP-UX 11i v3 I/O Cards (208.82 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories