Évaluations - 5, GPA: 4
(
)
)
|
Facilité d'utilisation
1 Connect the Modem to a Computer Get the DSL Modem from your DSL Quick Start Kit and take it out of the bag. 2 Get the Power Cord from your DSL Quick Start Kit. Note: Your Power Cord may look different. *3 Plug the smaller end of the Power Cord into the Black Port on the back of the Modem. 4 Plug the larger end of the Power Cord into a Power Outlet. 5 Make sure the Power Switch ■o’*! is ON. ■2VOCOÎA 1 1 IlllilS Stepg Make sure the Power Light on the Modem is SOLID Green. Note: The DSL light may blink. 7 Get the Yellow Cable ! 8 Plug one end of the Yellow Cable into any of the Yellow Ports on the back of the Wireless DSL Modem. 9 Make sure that your computer is turned on.Then, plug the other end of the Yellow Cable into the Ethernet Port on the back of the computer. An Ethernet Port looks similar to a regular Phone Jack, but is slightly larger. Step 10 Make sure that 1 of the 4 Ethernet lights on the Modem is Green.This may take a few moments. Note: If the Ethernet Light does NOT turn green, make sure the Yellow Cable is properly connected on both ends. Get the Black or Gray DSL Cable from your DSL Quick Start Kit. Step 12 Plug one end of the DSL Cable into the Gray Port located on the back of the Modem. Step 13 Plug the other end of the DSL Cable into the Phone Jack closest to your computer. Step 14 Make sure All Devices with the same phone number as your DSL Line have Phone Filters.This includes telephones,fax machines, caller ID boxes, satellite TV receivers,TiVo devices, and answering machines. S.ep15 Make sure that the Power and DSL Lights are solid Green.This may take up to 30 seconds. Note: If the DSL Light continues to blink, make sure you received notification from your DSL Internet Service Provider that your DSL service has been activated. example of a typical inline phone filter Flip this Quick Start Guide over to continue 2 Configure the Modem I Open a Web browser (Netscape Navigator or Internet Explorer,for e...