Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Matériel de réseau - DH550R (2.34 mb)
Matériel de réseau - DH550R (1.66 mb)
Facilité d'utilisation
Tools needed for installation
E. Remove the flat head screws (M3xL8) (C) with a
!
Philips screwdriver and pull open the cover to the
left and right.
Note: Prevent the cover from falling off when the
screws have been turned loose.
C
C
1. Power drill 2. Drill head 3. Hammer 4. Wrench
5.Allen wrench 6.Philips screwdriver
7. Pencil
12mm
5mm/6mm
Installation steps
Flat head screw
(M3xL8) x 8
1.Secure bracket to a wall
A. Please identify the type of the target wall: Concrete or
F. Remove the flat head screws (M4xL10) (D) with a
!
wood.
Philips screwdriver and remove the outer display
Note: DO NOT secure the bracket to any decorative
post or plasterboard for wood walls.
frame.
Note: Prevent the frame from falling off when the
B. Please drill holes of diameter 10mm and depth 55mm
D
screws have been turned loose.
in concrete walls with power drill at locations you
have marked earlier.
10
D
Ø
Note: Please select screws according to the type of
the wall. The expansion screws (B) that come with
your product are designed for cement walls only.
Screws for wood wall installation shall feature
adequate strength and be validated by qualified
55
technicians.
Flat head screw
(M4xL10)x4
Cement walls
4~7
228.1
C. Hammer the expansion screws (M8xL60) (B) in the
A
holes drilled earlier and tighten their nuts.
G. Remove the flat head screws SHCS (M4xL12) (E) with
B
B
a Philips screwdriver and remove the outer display
frame.
Spring washer
723.5
EE
Nut
260
E
Expansion screw
(M8xL60)x6
723.5
SHCS
(M4xL12)x4
220
D. Remove the flat head screws (M3xL8) (C) with a Philips
H. Suspend the bracket by pressing it through the
screwdriver before pulling open the cover upwards to
expansion screws before securing their nuts.
the left and right.
C
C
Flat head screw
(M3xL8) x 20
... Ce manuel est également adapté pour les modèles :
Matériel de réseau - DL550R (11.79 mb)