Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
PERSONAL SAFETY 10. Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 3 11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 12. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. 14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 15. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. TOOL USE AND CARE 16. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 17. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. 18. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. 19. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 20. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired. SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 4 21. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 22. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 24. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning”section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES 1. Avoid serious eye injury. ALWAYS wear ANSI-approved safety impact eye glasses underneath an ANSI-approved safety impact full face shield when operating the Grinder. 2. Dress safely. Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing long-sleeve shirt, roll sleeves up above the elbows. 3. Make sure the Power Switch (7) is in its “OFF” position before plugging the Power Cord/Plug (13) into an electrical outlet. 4. Do not abuse the Power Cord/Plug (13). Do not pull the Power Cord to disconnect the Plug from an electrical outlet. Do not move the Grinder with the Power Cord/Plug in the outlet. Keep the Power Cord/Plug away from heat, oil, sharp, edges, and its own Buffing Wheel (39) and Grinding Wheel (40). 5. Never leave the Grinder unattended while it is running. Always turn off the tool, unplug the tool from its electrical outlet, and wait until its wheels stop rotating before leaving the area. 6. Never use the sides of the Grinding Wheel (40) to grind objects. SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 5 7. Keep all Guards in place and in proper working order. 8. Remove adjusting keys and wrenches. Check to make sure all adjusting keys and wrenches are removed from this tool before turning it on. 9. Never attempt to remove material stuck in the moving parts of the Grinder while the tool is turned on, plugged in, or running. 10. Use light pressure when starting to grind. Too much pressure on a cold Grinding Wheel (40) can cause the wheel to crack. 11. When replacing the Buffing Wheel (39) and/or Grinding Wheel (40), make sure each wheel has a minimum 3500 RPM rating. 12. When replacing the Grinding Wheel (40), do not overtighten the Hex Nut (41). Ex...