Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
SPECIFIC SAFETY RULES 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Bench Grinder in areas near flammable chemicals, dusts, and vapors. 2. Maintain labels and nameplates on the Bench Grinder. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 3. WARNING! To avoid serious personal injury and/or property damage, always use Grinding Wheels (part #64) that are rated at 3450 RPM or greater on this particular Bench Grinder. 4. Replace a cracked, broken, or excessively worn Grinding Wheel (part #64) immediately. Use only the flanges furnished with the Bench Grinder. Do not overtighten the wheel nut. 5. Always wear a safety impact full face shield, hearing protection, and heavy duty work gloves when using this product. A safety impact full face shield, hearing protection, and heavy duty work gloves are available from Harbor Freight Tools. 6. Keep all guards in place and working properly. SKU 90003 PAGE 5 7. Always maintain a 1/16” distance or less between the Grinding Wheels (part #64) and Left and Right Tool Rests (parts #28, #32) as the diameter of the Grinding Wheels decrease with use. 8. To avoid accidental electrical shock, do not allow the Power Switch (part #3) to become wet. Do not touch the Power Switch with wet hands. 9. When using the Bench Grinder, always maintain a firm grip on the object being ground with both hands. 10. To avoid accidental burns use caution when handling an object that is being ground. Allow sufficient time for the object to completely cool before handling. 11. Always remove all adjusting keys and wrenches from the Bench Grinder before starting. 12. Do not pull or carry the Bench Grinder by its Power Cord (part #4), or pull the Cord around sharp corners or edges. Do not unplug the Bench Grinder by pulling on the Cord. Keep the Cord away from heated surfaces. 13. Do not force the tool. This Bench Grinder will do the work better and safer at the speed and capacity for which it is designed. 14. Keep fingers and hands as far away as possible from the rotating Grinding Wheels (part #64). 15. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the safe operation of this product. Replace or repair damaged or worn parts immediately. 16. Replacement parts and accessories. When servicing, use only identical replacement parts. Only use accessories intended for use with this product. 17. Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended. 18. Stay alert. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand. 19. Do not operate this product when fatigued or under the influence of alcohol or drugs. SKU 90003 PAGE 6 22. Always turn off the Bench Grinder and unplug it from its electrical outlet before changing accessories or performing any inspection, maintenance, or cleaning procedures. 23.The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be under WARNING! stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied the the operator. 24.Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known to the State of WARNING! California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies depending on how often you do this type of work. To reduce your exposure to these chemicals work in a well ventilated area, and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5 et seq.) 25. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualfified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the ...