Évaluations - , GPA: ( )

Instructions Porter-Cable, Modèle PTS7

Fabricant : Porter-Cable
Taille : 343.42 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

• Remove any jewelry, watches, identifications, bracelets, necklaces, etc. which might become caught by the tool. • Keep hands away from moving parts. Tie up or cover long hair. • Always wear proper fitting clothing and other safety equipment when using this tool. HAZARD RISK OF CUT OR BURNS WHAT COULD HAPPEN HOW TO PREVENT IT • Tools which cut, shear, drill, staple, punch, chisel, etc. are capable of causing serious injury. • Keep the working part of the tool away from hands and body. D29847 4- ENG SPECIFICATIONS NOTE: All models come standard with a *PSA type sander pad. Model # Orbit Pad Size Vacuum Max Operating Pressure RPM (Free Speed) Spindle Thread Air Inlet PTS3 3/16" 5" No 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS4 3/16" 5" Yes 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS5 3/32" 5" No 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS6 3/32" 5" Yes 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS7 3/16" 6" No 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS8 3/16" 6" Yes 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS9 3/32" 6" No 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PTS10 3/32" 6" Yes 90 psig 12000 5/16-24 Female 1/4-18 NPT Female PAD SPECIFICATIONS Replacement sander pads are available at the store the unit was purchased. Model # Pad Dia. Abrasive Disc Type Vacuum Pad Weight Spindle Thread Models Used With PTA36 5" *PSA No 100 g 5/16-24 Male PTS3, PTS5 PTA37 5" *PSA 5 hole 100 g 5/16-24 Male PTS4, PTS6 PTA38 5" Hook & Loop No 100 g 5/16-24 Male PTS3 PTS5 PTA39 5" Hook & Loop 5 hole 100 g 5/16-24 Male PTS4, PTS6 PTA40 6" *PSA No 130 g 5/16-24 Male PTS7, PTS9 PTA41 6" *PSA 6 hole 130 g 5/16-24 Male PTS8, PTS10 PTA42 6" Hook & Loop No 130 g 5/16-24 Male PTS7, PTS9 PTA43 6" Hook & Loop 6 hole 130 g 5/16-24 Male PTS8, PTS10 *PSA- Pressure Sensitive Adhesive 5- ENG D29847 Before each use: . Drain water from air compressor tank and condensation from air lines. See air compressor’s operators manual. Disconnect the tool from the air supply before lubricating or changing abrasive disc. . Lubricate tool, see “Maintenance” section in this manual. . Place abrasive disc onto sander pad. See "To Install Abrasive Disc" paragraph in the "Maintenance" section. . Connect tool to air hose of recommended size. NOTE: The use of a quick connect set makes connecting easier. IMPORTANT: The use of air filters and air line lubricators is recommended. To use: . Turn air compressor on and allow air tank to fill. . Set the air compressor’s regulator to 90 PSI. This tool operates at a maximum 90 PSI pressure. . Depress trigger to operate tool. ASSEMBLY IMPORTANT: Line pressure or hose inside diameter should be increased to compensate for unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8” I.D. and fittings should have 1/4” NPT thread. OPERATION ASSEMBLY IMPORTANT: Line pressure or hose inside diameter should be increased to compensate for unusually long air hoses (over 25 feet). Minimum hose diameter should ...