Log:
Évaluations - 3, GPA: 3.7 ( )

Instructions Central Pneumatic Air Compressor, Modèle 96573

Fabricant : Central Pneumatic Air Compressor
Taille : 488.3 kb
Nom Fichier : 96573.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


4. Apply an adhesive-backed sanding head (not included) to the Pad. Cut the sanding head to size if necessary. 5. Secure all workpieces with a clamp or vise so that both of hands are free to operate the Sander. 6. Connect the Sander to the air compressor hose at the Regulator Assembly (30). 7. Grip the Handle with your left hand and the Body (13) with your right (reverse if you are left-handed). Depress the Trigger (28) with your left hand to turn the tool on. SKU 96573 For technical questions, please call 1-800-444-3353. Page 6 8. Allow the motor to reach its full speed before starting to sand. 9. Turn the Regulator Knob (31) to adjust the oscillation speed. The closer the Regulator Knob is to “MAX” the faster the Pad will move. 10. Always keep a safe distance from the sanding pad while the Sander is operating. Do not apply pressure. If the Pad slows down as the material is being worked; pressure is being applied. Allow the Sander to do the job. 11. Always keep your body and clothing a safe distance from the running Sander. 12. Always maintain a good grip with both hands when operating this tool. 13. After the Sander has been turned off, continue to hold onto the tool with both hands until the Pad stops completely; then set the tool down. 14. Disconnect Sander from compressor when finished. 15. Clean, then store the product indoors out of children’s reach. Maintenance and servicing damaged products can fail, causing personal injury. do caution not use a damaged product. if abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, maintenance, and lubrication 1. beFore eacH use, inspect the general condition of the product. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts and any other condition that may affect its safe operation. 2. aFter use, clean external surfaces of the product with clean, moist cloth. SKU 96573 For technical questions, please call 1-800-444-3353. Page 7 please read tHe FolloWing careFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. parts list part description 1 Body Cap 2 Bearing 3 R-Bearing Case 4 Cylinder 5 Spring Pin 2.5x6 6 Rotor 7 Vane 8 Rotor Spacer 9 F-Bearing Case 10 Bearing 11 Lock Nut 12 O-ring 32.5 13 Body 14 Balancer 15 Bolt 16 Pad Retainer 17 Bearing part description 18 Snap Ring 19 Spacer 20 Pad 21 Bolt Set 22 Nut Set 23 Valve Cap 24 O-ring 25 Valve Spring 26 Valve 27 Valve Pin 28 Trigger 29 Spring Pin 30 Regulator Assembly 31 Regulator Knob 32 Nut Set 33 Support SKU 96573 For technical questions, please call 1-800-444-3353. Page 8 asseMbly diagraM record product’s serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 96573 For technical questions, please call 1-800-444-3353. Page 9 90 day Warranty 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories