Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
On-board side mounted spindle storage. Tilting table for sanding beveled parts. 2” diameter dust outlet with 2” to 4” adapter fitting included. 5 interchangeable spindle assemblies: 1/4", 1/2", 5/8", 1 1/2", 2" dia.with 100 grit sand paper. 1 1/2" & 2" spindles come with rubber drums. Includes 4 table inserts to accomodate different spindle sizes. OSCILLATIONS PER MINUTE 29 LENGTH OF OSCILLATION 15.16” (24 mm) TABLE SIZE 14 1.2” x 14 1.2” (368 x 368 mm) TABLE TILT 0° - 45° TABLE HEIGHT FROM BOTTOM OF BASE 18 5.16” (465 mm) SPINDLE SIZES 1.4” TO 2” (6.2 TO 50.8 mm) DUST CHUTE OUTLET 2” (50.8 mm) SPINDLE SPEED 1720 RPM BASE DIMENSIONS (L x W 14 1.2” x 14 1.2” (368 x 368 mm) MOTOR 1.2 HP, 110 V, 7.5 A WEIGHT 81 LBS (37 kg) REVISION 3 FEB 13/07 © COPYRIGHT GENERAL INTERNATIONAL 02/2007 GENERAL® INTERNATIONAL 8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3 Telephone (514) 326-1161 • Fax (514) 326-5555 THANK YOUfor choosing this General® International model 15-220 oscillating spindle sander. This machine has been carefully tested and inspected before shipment and if properly used and maintained, will provide you with years of reliable service. To ensure optimum performance and trouble-free operation, and to get the most from your investment, please take the time to read this manual before assembling, installing and operating the unit. The manual’s purpose is to familiarize you with the safe operation, basic function, and features of this oscillating spindle sander as well as the set-up, maintenance and identification of its parts and components. This manual is not intended as a substitute for formal woodworking instruction, nor to offer the user instruction in the craft of woodworking. If you are not sure about the safety of performing a certain operation or procedure, do not proceed until you can confirm, from knowledgeable and qualified sources, that it is safe to do so. Once you’ve read through these instructions, keep this manual handy for future reference. GENERAL ® INTERNATIONAL WARRANTY All component parts of General® International machinery are carefully tested and inspected during all stages of production,and each machine is thoroughly inspected upon completion of assembly.Because of our commitment to quality and customer satisfaction,General® International agrees to repair or replace,within a period of 24 months from date of purchase,any genuine part or parts which,upon examination,prove to be defective in work manship or material. In order to obtain this warranty, all defective parts must be returned freight pre-paid to General® International Mfg.Co.,Ltd.Repairs attempted without our written authorization will void this warranty. Disclaimer:The information and specifications in this manual pertain to factory” modifications may render some or all information in this the unit as it was supplied from the factory at the time of printing. manual inapplicable to your machine. Further, as several generations of Because we are committed to making constant improvements, this oscillating spindle sander and several versions of this manual may General® International reserves the right to make changes to compo-be in circulation, if you own an earlier or later version of this unit, this nents, parts or features of this unit as deemed necessary, without prior manual may not depict your machine exactly. If you have any doubts notice and without obligation to install any such changes on previously or questions contact your retailer or our support line with the model and delivered units. Reasonable care is taken at the factory to ensure that serial number of your unit for clarification. the specifications and information in this manual corresponds with that of the unit with which it was supplied. However, special orders and “after Rules for Safe Operation To help ensure safe operation, please take a moment to learn the machine’s applications and limitations, as well as potential hazards. General International disclaims any real or implied warranty and hold itself harmless for any injury that may result from the improper use of it’s equipment. 1. Do not operate this sander when tired, distracted or under the effects of drugs, alcohol or any medication that impairs reflexes or alertness. 2. Keep the work area well lit, clean and free of debris. 3. Stay alert! Give your work your undivided attention. Even a momentary distraction can lead to serious injury. 4. Do not wear loose clothing, gloves, bracelets, necklaces, or other jewelry. Wear face, eye, ear, respiratory and body protection devices. Wear protective hair covering to contain long hair and wear non-slip footwear. 5. Keep hands well away from the spindle and all moving parts. Do not clear chips and sawdust away with hands. Use a brush. 6. Fine particulate dust is a carcinogen that can be hazardous to health. Always work in a well ventilated area and whenever possible use a dust collector to minimize health hazards. 7. Be sure the spindle has achie...