Évaluations - 4, GPA: 4 ( )

Fabricant : Festool Taille : 434.91 kb Nom Fichier : 464760_005_ets150_usa.pdf Langue d'enseignement:

The turbo-filter has to be changed when it is so full of dust that the extraction power diminishes: –Push the front cardboard section of the turbo- filter with the sealing lip (3.1) onto the extraction nozzle (3.8) of the fi lter holder –Insert rear cardboard section with slot (3.3) onto the retaining strip (3.9) of the fi lter holder – Push the filter holder with its opening (3.6) as far as it will go onto the extraction nozzle (3.5) of the machine and clamp tight by turning rotary knob (3.7). External extraction by an extraction unit 4.1 In order to avoid frequent changing of the turbo- filter when carrying longer sanding jobs, it is possible to connect a Festool extractor to the unit instead of using inbuilt extraction. In this case, the extraction pipe (O 27 mm) (4.1) of the extraction unit is connected to the suction nozzle. 4 Attaching sanding material The appropriate Stickfix sanding paper and Stick- fix sanding felt can be fastened quickly and easily onto the Stickfix sanding base. 5.15.2 The self-adhesive sanding material (5.2) is simply pressed onto the sanding base (5.1) and held safely in place by the Stickfix sanding base velcro surface. Choice and installation of the grinding disks The appliance can be fitted with three grinding disks (5.1) of different hardness depending on the surface to be treated. • Hard: coarse grinding on surfaces, grinding at edges. • Soft: universal for coarse and fine grinding, for flat and curved surfaces. • Super-soft: fine grinding on formed parts, curves, radii. Do not use on edges! The grinding disks and the tool-holding fi xture on the appliance are equipped with a positive holder (6.1). Make sure the grinding disk is correctly positioned before screwing it tight. Working with the tool Never overload the tool by using too much pressure! The best sanding results are achieved when applying moderate pressure. The ETS 150/3 EQ gives the best surface quality and low abrasion. The ETS 150/5 EQ provides high abrasion with good surface quality. The sanding performance and quality depend mainly on the choice of the right sanding material. Festool offers the appropriate sanding material for all applications (see Festool catalogue or on the Internet under We recommend the following settings on the rotary control (2.3) for electronic machines: 5 - 6 -sanding with max. drive -sanding old paint -sanding wood and veneer prior to painting -interim sanding of paint on surfaces 4 - 5 -sanding of thinly applied primer -sanding of wood with sanding vlies -sanding edges on wooden parts -smoothing primed wooden surfaces. 3 - 4 -sanding full wooden and veneer edges -sanding in the grooves/rebates of windows and doors -interim paint sanding on edges -pre-sanding natural wood windows with sanding vlies -smoothing wood surfaces with sanding felt prior to staining -rubbing down stained surfaces with sanding vlies -rubbing down or removing excess lime paste with sanding vlies 2 - 3 -interim paint sanding on stained surfaces -cleaning natural wood window grooves with sanding felt 1 - 2 -sanding stained edges -sanding thermoplastic synthetics Maintenance and care Any maintenance or repair work requiring the motor housing to be opened may only be carried out by an authorised service workshop. Maintenance or repair work carried out by an unauthorised person can lead to the wrong connection of the power leads or other components, which in turn can lead to accidents with serious consequences. Always remove the plug from the mains supply socket before carrying out any work on the machine! Always keep the machine and the ventilation slots clean. Sanding base brakes 6.16.2 5 The sanding base is braked by a collar (6.2) in order to prevent any uncontrolled excessive speed of the sanding base. Because the collar wears down in the course of time, it has to be replaced by a new one (453388) as soon as there is any reduction in the braking effect. Accessories, tools For safety reasons, only use original Festool accessories and tools! The accessory and tool order number can be found in the Festool catalogue or on the Internet under Systainer Many Festool products are shipped in a unique system container, called "Systainer". This provides protection and storage for the tool and accessories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors. 7.17.27.3 - Place one systainer on top of the other. - Release all four latches on the lower systainer by pulling back at their top edges (7.1). - Slide all four latches upward (7.2). -Snap all four latches back to their fl at position (7.3) so they engage the stacking tabs of the upper systainer. Warranty Conditions of 1+2 Warranty You are entitled to a free extended warranty (1 year + 2 years = 3 years) for your Festool power tool. Festool shall be responsible for all shipping costs during the first year of the warranty. During the second and third year...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :