ANGLE GRINDER DOUBLE INSULATED AG402 Your angle grinder has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS • Introduction ....................

When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord will cause a drop in line voltage, resulting in a loss of power and causing the motor to overheat. Use the chart provided below to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used. **Ampere rating (on tool data plate) 0

It is important to keep moving the object back and forth across the grinding wheel and to cool the object frequently using the grinder’s Coolant Tray. AUTO-ON WORKLIGHT SHIELD RODS (RIGHT AND LEFT) SPARK DEFLECTOR (RIGHT) WHEEL GUARD WORK REST (RIGHT) ON SPARK DEFLECTOR (LEFT) OFF SAFETY SHIELD(S) WORK REST (LEFT) COOLANT TRAY SWITCH MODEL BGH825 Fig. 3c ASSEMBLY WARNING: Always disconnect the bench grinder from the power source before performing any assembly or adjustment. Failure to do so coul

When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for buying a Ryobi product. SAVE THIS MANUAL FOR FUTURE REFERENCE 2 TABLE OF CONTENTS n Table of Contents 2 n Introduction 2 n General Safety Rules 3-4 n Specific Safety Rules 5 n Symbols 6-7 n Electrical 8 n Features 9 n Tools Needed 10 n Loose Parts 10 n Assembly 11-12 n Operation

Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Tool Use and Care ¦ Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. ¦ Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. ¦ Do not use tool if switch does not t

See figures 4 and 5. . To install abrasive mop disc, thread the flange nut on the spindle with the flat side of nut facing down. Finger tighten. See figure 6. . Depress and hold the spindle lock button and rotate the wheel clockwise until the spindle locks in position. . Securely tighten the flange nut with the wrench provided. Do not overtighten. GRINDING, SANDING, BRUSHING See Figure 7. . Always carefully select and use grinding wheels that are recommended for the material to be ground. . Make

Your new Bench Grinder has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new machine. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your grinder properly and only for what it is intended, you will enjoy years of safe, reliable

(100 mm) Rating 120 V c.a., 60Hz No Load Speed 11,000 RPM Amperes 4.4 A Net Weight 4.0 lbs. (1.8 kg.) 4’’ Grinder THANK YOU FOR BUYING A RYOBI ANGLE GRINDER. Your new angle grinder has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new angle grinder. Pay close attention

Following this rule will reduce the risk of electric shock, fire, or serious injury. . Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. . Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury. . Protect your hearing. Wear hearing protection during extended periods of operation. F

SAFETY GLASSESSAFETY GLASSESFORESIGHTIS BETTERTHAN NO SIGHTFORESIGHTIS BETTER THAN NO SIGHT WEAR YOUR The operation of any grinder can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Page 3 RULES FOR SAFE OPER